Sch
hyduez·sch
About the Sch PCB
Sch is an open source ESP32 PCB design by hyduez, published on GitHub. It is a 2-layer board measuring 81.1 × 75.6 mm, with 22 components from 14 distinct parts.
Its main chip is the ESP32-S3-WROOM-1, from the ESP32 family. Other key parts include the AMS1117-3.3 and CH334F. By type, the board carries 6 capacitors, 5 connectors, 4 resistors, 3 ICs, 3 diodes and 1 switch.
It belongs with the iot & wireless, displays & leds and usb & debug tools designs in this gallery.
From the project
Super Cool Hub
This project implements a budget and cool USB Hub thanks to the OTG USB feature that ESP32 S2/S3 brings on! On BOM.md u can find each component with its own link to Aliexpress/Mouser. Due to expensive carriers fees and the niche market of Ecuador, it could be more than 20$ USD. The only firmware u are gonna need, is based on the brain of this PCB; if u want to do something when a state is detected, change the switch to flash the ESP32 and start coding. Anyways, this project aimed to be more; include OLED displays with tact buttons and commands to toggle data traveling, power on ports and show…

Main components on the Sch
Sch bill of materials (BOM)
22 components, 14 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | AMS1117-3.3 | SOT-223-3_TabPin2 | U1 |
| 1 | CH334F | QFN-24-1EP_4x4mm_P0.5mm_EP2.7x2.7mm | U2 |
| 1 | ESP32-S3-WROOM-1 | ESP32-S3-WROOM-1 | U3 |
| 4 | USB_A | USB_A_Connfly_DS1098_Horizontal | J1, J2, J3, J4 |
| 1 | SparkFun DEV-14050 (CH340G) | PinHeader_1x06_P2.54mm_Vertical | J5 |
| 1 | SW_MEC_5G | SW_PUSH_6mm | SW1 |
| 1 | LED | LED_0805_2012Metric | D1 |
| 2 | 1N5819 | D_DO-41_SOD81_P10.16mm_Horizontal | D2, D3 |
| 1 | 1uF | C_0805_2012Metric | C1 |
| 2 | 100nF | C_0805_2012Metric | C2, C3 |
| 2 | 10uF | C_0805_2012Metric | C4, C6 |
| 1 | 22uF | C_0805_2012Metric | C5 |
| 3 | 10k | R_0805_2012Metric | R1, R2, R3 |
| 1 | 330 | R_0805_2012Metric | R4 |
Sch design files
The KiCad project lives in the hyduez/sch repository on GitHub; these links point at the commit this page was built from.
- Layoutsch.kicad_pcb
- Schematicsch.kicad_sch
- BOMfabrication/bom/sch-bom.csv
Sch: common questions
What microcontroller does the Sch use?
The Sch is built around the ESP32-S3-WROOM-1, from the ESP32 family.
How big is the Sch PCB?
The Sch measures 81.1 × 75.6 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Sch?
22 components, from 14 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Sch design files?
From the hyduez/sch repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Sch design in my own project?
The repository has no license, so all rights stay with hyduez. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Sch without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k