Golf-Robot-2024
ibuki-oono·Golf-Robot-2024·Circuit_KiCAD_data/Arduini-Sheild_L6470-rs485-canfd/Arduini-Sheild_L6470-rs485-canfd.kicad_pcb
About the Golf-Robot-2024 PCB
Golf-Robot-2024 is an open source PCB design by ibuki-oono, published on GitHub. It is a 2-layer board measuring 68.6 × 53.3 mm, with 75 components from 38 distinct parts.
Other key parts include the MAX485E, MCP2517FD-xSL, MCP2542FD-E/SN, L6470H and L7806. By type, the board carries 26 capacitors, 18 resistors, 15 connectors, 6 ICs, 4 diodes and 3 transistors.
It belongs with the robotics & motion designs in this gallery.
Main components on the Golf-Robot-2024
Golf-Robot-2024 bill of materials (BOM)
75 components, 38 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MAX485E | SOIC-8_5.23x5.23mm_P1.27mm | U1 |
| 1 | MCP2517FD-xSL | SOIC-14_3.9x8.7mm_P1.27mm | U2 |
| 1 | MCP2542FD-E/SN | SOIC-8_3.9x4.9mm_P1.27mm | U3 |
| 2 | L6470H | HTSSOP-28-1EP_4.4x9.7mm_P0.65mm_EP3.4x9.5mm | U4, U6 |
| 1 | L7806 | TO-263-2 | U5 |
| 1 | 2SA1015 | TO-92_Inline | Q1 |
| 2 | Q_NMOS_GSD | SOT23GDS | Q2, Q3 |
| 1 | 20MHz | Crystal_HC49-U_Vertical | Y1 |
| 1 | Power | PinSocket_1x08_P2.54mm_Vertical | J1 |
| 1 | Analog | PinSocket_1x06_P2.54mm_Vertical | J2 |
| 1 | Digital/PWM | PinSocket_1x10_P2.54mm_Vertical | J3 |
| 1 | Digital/PWM | PinSocket_1x08_P2.54mm_Vertical | J4 |
| 1 | FeetechSTS | Molex_SPOX_5267-03A_1x03_P2.50mm_Vertical | J5 |
| 1 | Jack-DC | BarrelJack_GCT_DCJ200-10-A_Horizontal | J6 |
| 2 | XH-4 | JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J7, J11 |
| 1 | PH-4 | JST_PH_B4B-PH-K_1x04_P2.00mm_Vertical | J8 |
| 2 | XH-2 | JST_XH_S2B-XH-A_1x02_P2.50mm_Horizontal | J9, J10 |
| 2 | XH-4 | JST_XH_S4B-XH-A_1x04_P2.50mm_Horizontal | J12, J13 |
| 2 | PinHeader-4 | PinHeader_1x04_P2.54mm_Vertical | J16, J17 |
| 2 | 200K | GF063_VR | RV1, RV2 |
Show 18 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 3.6V | D_SOD-323_HandSoldering | D1, D3 |
| 2 | BAV99 | SOT-23-3 | D2, D4 |
| 6 | 0.1u | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C9, C10, C16, C22, C23 |
| 2 | 22p | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C2, C3 |
| 6 | 0.01u | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C4, C6, C8, C17, C19, C21 |
| 2 | 0.22u | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C5, C18 |
| 6 | 100p | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C7, C13, C14, C20, C26, C27 |
| 1 | 100u | CP_Elec_10x10.5 | C11 |
| 2 | 4.7u | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C12, C25 |
| 1 | 0.33u | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C15 |
| 1 | 7.5K | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1 |
| 1 | 20K | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2 |
| 2 | 2.2K | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3, R4 |
| 2 | 33K | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R5, R13 |
| 2 | 8.2K | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R6, R14 |
| 2 | NM/100R | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R7, R15 |
| 6 | 10K | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R8, R9, R10, R16, R17, R18 |
| 2 | 100R | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R11, R12 |
Golf-Robot-2024 design files
The KiCad project lives in the ibuki-oono/Golf-Robot-2024 repository on GitHub; these links point at the commit this page was built from.
Golf-Robot-2024: common questions
How big is the Golf-Robot-2024 PCB?
The Golf-Robot-2024 measures 68.6 × 53.3 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Golf-Robot-2024?
75 components, from 38 distinct parts. The full bill of materials is listed on this page.
Where can I download the Golf-Robot-2024 design files?
From the ibuki-oono/Golf-Robot-2024 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Golf-Robot-2024 design in my own project?
The repository has no license, so all rights stay with ibuki-oono. Use it as a reference, and ask the author before reusing the design.
Similar boards
Stack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kCube batteryboard
willem-pennings
95 × 95 mm4 parts2LGPL-3.01.1kTrollerv2
rene-dev
100 × 75 mm33 parts4LGPL-3.0979Powerstep
rene-dev
95.2 × 71.5 mm28 parts4LGPL-3.097911ua
rene-dev
57.3 × 19 mm26 parts2LGPL-3.0979Diff driver
rene-dev
32 × 22 mm14 parts2LGPL-3.0979