7 open source boards using the MCP2542FD-E/SN
Real designs built with the MCP2542FD-E/SN, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Microchip SAM
Duet3 MB 6HC
Duet3D
134 × 140 mm652 parts4LCustom license50Microchip SAM
Duet3-Mainboard-6XD
Duet3D
115 × 140 mm467 parts4LCustom license6ESP32
LiF FC-PCB rev1
aventadoro-ish
70 × 90 mm193 parts4LNo license2Microchip SAM
Duet3 MB 6HC
ReadHeadRedemption
134 × 140 mm652 parts4LNo license0STM32
Cooler master
joshbredbenner
331.1 × 91 mm186 parts4LNo license0RP2040/RP2350
RRFExtRP2040Board
nyarurato
100 × 95 mm86 parts2LNo license0Golf-Robot-2024
ibuki-oono
68.6 × 53.3 mm75 parts2LNo license0
How designs wire the MCP2542FD-E/SN
Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the MCP2542FD-E/SN connects to, and the resistors, capacitors and other passives placed on it.
- The VDD pin has a decoupling capacitor on 5 of 7 designs, most often 100 nF.
- The VIO pin has a decoupling capacitor on 5 of 7 designs, most often 100 nF.
- The STBY pin is tied to GND on 6 of 7 designs.
- The CANL pin has a inductor on 3 of 7 designs.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VSSpin 2 | Connected to: GND 100% | — |
| VDDpin 3 | Connected to: 5V 86% |
|
| VIOpin 5 | Connected to: 3.3V 86% |
|
| CANLpin 6 | Connected to: A connector 57% |
|
| CANHpin 7 | Connected to: A connector 57% |
|
| STBYpin 8 | Connected to: GND 86% | — |
2 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Duet3 MB 6HC by Duet3D, Duet3-Mainboard-6XD by Duet3D, LiF FC-PCB rev1 by aventadoro-ish and Golf-Robot-2024 by ibuki-oono.
The MCP2542FD-E/SN in open source designs
The gallery holds 7 open source boards using the MCP2542FD-E/SN from 7 GitHub repositories; a typical one measures about 115 × 95 mm and carries around 193 components.
71% use four copper layers or more, and 0% carry an open source license.
The most starred is Duet3 MB 6HC by Duet3D.
Parts used alongside the MCP2542FD-E/SN
Microcontrollers on boards using the MCP2542FD-E/SN
What boards using the MCP2542FD-E/SN are built for
MCP2542FD-E/SN: common questions
Where can I find a MCP2542FD-E/SN reference design?
Each of the 7 boards on this page is a real design using the MCP2542FD-E/SN. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the MCP2542FD-E/SN VDD pin?
The VDD pin has a decoupling capacitor on 5 of 7 designs, most often 100 nF. Counted from the KiCad layouts of 7 open source designs using the MCP2542FD-E/SN.
What decoupling capacitors do designs use on the MCP2542FD-E/SN VIO pin?
The VIO pin has a decoupling capacitor on 5 of 7 designs, most often 100 nF. Counted from the KiCad layouts of 7 open source designs using the MCP2542FD-E/SN.
How is the MCP2542FD-E/SN STBY pin connected?
The STBY pin is tied to GND on 6 of 7 designs. Counted from the KiCad layouts of 7 open source designs using the MCP2542FD-E/SN.
What parts are used alongside the MCP2542FD-E/SN?
The 74HCT2G34GW,125, 74LVC2G34GW,125, AP22816AKEWT, AP7361C-33E-13 and CM1624−08DE appear in the most repositories here.
Which microcontrollers do boards using the MCP2542FD-E/SN use?
Most are built on Microchip SAM (3), ESP32 (1), RP2040/RP2350 (1) and STM32 (1).
How big is a typical board using the MCP2542FD-E/SN?
The median is 115 × 95 mm, and 29% are two-layer designs.
What is the most popular open source board using the MCP2542FD-E/SN?
By GitHub stars, Duet3 MB 6HC by Duet3D, with 50 stars.
Can I simulate one of these boards using the MCP2542FD-E/SN before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.