HardLabs

DRILLTEAMYMchanges

ICRS·IPRL-Electronics-Hardware·PCBs/DRILLTEAM/DRILLTEAMYMchanges.kicad_pcb

DRILLTEAMYMchanges PCB layout, top view — open source ESP32 board by ICRS

About the DRILLTEAMYMchanges PCB

DRILLTEAMYMchanges is an open source ESP32 PCB design by ICRS, published on GitHub. It is a 2-layer board measuring 120 × 93 mm, with 64 components from 20 distinct parts.

Its main chip is the Z_ESP32_DevKitC_38pin_socket, from the ESP32 family. Other key parts include the HX711 and Pololu_Breakout_DRV8825. By type, the board carries 24 resistors, 21 capacitors, 11 connectors, 4 ICs, 3 transistors and 1 module.

Main components on the DRILLTEAMYMchanges

HX711Pololu_Breakout_DRV8825

DRILLTEAMYMchanges bill of materials (BOM)

64 components, 20 distinct parts.

QtyPartRefs
1
~
U1
3
HX711
U4, U6, U7
1
Pololu_Breakout_DRV8825
A1
3
S8550
Q1, Q2, Q3
6
Conn_01x04
J1, J2, J6, J9, J12, J14
1
Conn_01x03
J3
1
XT60-M
J5
1
Conn_01x02
J10
2
Conn_01x08
J11, J15
1
100uF
C1
3
0.1u
C6, C28, C38
10
10uF
C7, C17, C19, C20, C23, C24, C25, C27 +2
4
10n
C8, C9, C10, C11
3
0.1uF
C16, C26, C36
4
10k
R5, R6, R26, R27
4
1K7
R7, R9, R11, R13
4
3K3
R8, R10, R12, R14
6
100
R16, R17, R20, R21, R28, R29
3
470
R18, R23, R31
3
220
R19, R22, R30

DRILLTEAMYMchanges design files

The KiCad project lives in the ICRS/IPRL-Electronics-Hardware repository on GitHub; these links point at the commit this page was built from.

DRILLTEAMYMchanges: common questions

What microcontroller does the DRILLTEAMYMchanges use?

The DRILLTEAMYMchanges is built around the Z_ESP32_DevKitC_38pin_socket, from the ESP32 family.

How big is the DRILLTEAMYMchanges PCB?

The DRILLTEAMYMchanges measures 120 × 93 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the DRILLTEAMYMchanges?

64 components, from 20 distinct parts. The full bill of materials is listed on this page.

Where can I download the DRILLTEAMYMchanges design files?

From the ICRS/IPRL-Electronics-Hardware repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the DRILLTEAMYMchanges design in my own project?

The repository has no license, so all rights stay with ICRS. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the DRILLTEAMYMchanges without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

More boards in IPRL-Electronics-Hardware

Similar boards