46 open source boards using the Pololu_Breakout_DRV8825
Real designs built with the Pololu_Breakout_DRV8825, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
DropBear
speeduino
116.1 × 98 mm196 parts2LNo license282AVR/Arduino
MPCNC-Nano-Estlcam-Shield
tnn85
160 × 100 mm92 parts2LCustom license70MmStep
luni64
81 × 49 mm32 parts2LMIT14RP2040/RP2350
Supp board
RedBigz
69 × 70 mm21 parts4LNo license6ESP32
PNP MOBO V2
GabrielD98
110 × 80 mm114 parts4LMIT4ESP32
Robotica
La-guajolota
100 × 100 mm52 parts2LMIT4Startracker
dkm
91.4 × 71.1 mm15 parts2LNo license4AVR/Arduino
V0.4.4b
PyroMix62
100 × 100 mm138 parts2LNo license3PiScope
cutec-chris
65 × 56 mm41 parts2LNo license3ESP32
Main Board
Ensmasteel
200 × 100 mm48 parts2LNo license2RP2040/RP2350
Autotracking Surgical Lamp
aeventre
56 × 79 mm41 parts2LNo license2AVR/Arduino
V0.4.4b
venderbroeck
100 × 100 mm138 parts2LGPL-2.01ESP32
Final project circ 1
c3n3
100.5 × 100 mm90 parts2LNo license1AVR/Arduino
StepperMotorControllerBoard
Case-Rocket-Team
39 × 39.4 mm37 parts2LNo license1ESP32
CNC-Router
diaxxu
115.4 × 66.6 mm28 parts2LMIT1NXP
3D printer
lpender3672
103.9 × 68.2 mm24 parts2LNo license1ESP32
GOONER2000
avi-guha
142 × 110 mm99 parts4LNo license0ESP32
Turntable rotator
MTalon63
100 × 100 mm57 parts2LMIT0ESP32
MainBoardV3.1FormB
Unimakers
120 × 120 mm51 parts4LNo license0AVR/Arduino
Klask
motty-mio2
69.1 × 53.8 mm18 parts2LCC-BY-SA-4.00AVR/Arduino
AutoWire-Cutter-Stripper
dnatov
59.7 × 38.1 mm16 parts2LNo license0AVR/Arduino
Motorcin bien temperado
granjero
79.4 × 43.6 mm15 parts2LNo license0NXP
Stepstick
starfishneuroscience
28 × 105 mm13 parts4LNo license0AVR/Arduino
ChessRobotArm
BujoreanuVlad
40.3 × 82.5 mm12 parts2LNo license0RP2040/RP2350
3D-Snake
mathisfun2048
60 × 60 mm9 parts2LNo license0AVR/Arduino
1.3
OpenLogicEFI
100 × 100 mm156 partsNo license18ESP32
Actionneurv0
Rami-Troudi
90.3 × 73.9 mm40 parts2LNo license1RP2040/RP2350
Dev board
rc-sr
65 × 66.2 mm24 parts2LMIT1MonoCtrl
davidfobar
47 × 83.8 mm21 parts2LNo license1ESP32
MainBoardV3.1FromA
Unimakers
83.7 × 100 mm50 parts2LNo license0Stepper drivers
ajkeeton
85.5 × 37 mm18 parts2LNo license0AVR/Arduino
V0.4.4c
speeduino
100 × 100 mm142 parts2LNo license282AVR/Arduino
Pre Ignition
OpenLogicEFI
100 × 100 mm136 partsNo license18ESP32
PAMI Stepper
Rami-Troudi
120.8 × 70.1 mm31 parts2LNo license1ESP32
MainBoardV3.2
Unimakers
83.7 × 100 mm50 parts2LNo license0ESP32
Pepermoot
robbertvdzon
109 × 136.5 mm16 parts2LNo license0
How designs wire the Pololu_Breakout_DRV8825
Read from the KiCad layouts of 35 open source designs, one per repository: what each pin of the Pololu_Breakout_DRV8825 connects to, and the resistors, capacitors and other passives placed on it.
- The FLT pin is left unconnected on 24 of 35 designs (3.3V on 4, a signal on 7).
- The VMOT pin has a decoupling capacitor on 14 of 35 designs, most often 100 µF (then 47 µF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 1, 7 | Connected to: GND 96% | — |
| FLTpin 2 | Connected to: Not connected 69% · a signal 20% | — |
| VMOTpin 8 | Connected to: 12V 69% · a signal 29% |
|
12 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include DropBear by speeduino, MPCNC-Nano-Estlcam-Shield by tnn85, 1.3 by OpenLogicEFI and MmStep by luni64.
The Pololu_Breakout_DRV8825 in open source designs
The gallery holds 46 open source boards using the Pololu_Breakout_DRV8825 from 35 GitHub repositories; a typical one measures about 91.4 × 83.1 mm and carries around 41 components.
89% are two-layer designs, the rest use four layers or more, and 17% carry an open source license.
The most starred is DropBear by speeduino.
Parts used alongside the Pololu_Breakout_DRV8825
Microcontrollers on boards using the Pololu_Breakout_DRV8825
What boards using the Pololu_Breakout_DRV8825 are built for
Pololu_Breakout_DRV8825: common questions
Where can I find a Pololu_Breakout_DRV8825 reference design?
Each of the 46 boards on this page is a real design using the Pololu_Breakout_DRV8825. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the Pololu_Breakout_DRV8825 FLT pin connected?
The FLT pin is left unconnected on 24 of 35 designs (3.3V on 4, a signal on 7). Counted from the KiCad layouts of 35 open source designs using the Pololu_Breakout_DRV8825.
What decoupling capacitors do designs use on the Pololu_Breakout_DRV8825 VMOT pin?
The VMOT pin has a decoupling capacitor on 14 of 35 designs, most often 100 µF (then 47 µF). Counted from the KiCad layouts of 35 open source designs using the Pololu_Breakout_DRV8825.
What parts are used alongside the Pololu_Breakout_DRV8825?
The LM2940S-5.0/NOPB, MPX4250AP, SP720ABTG, TC4424AVOA and Trig Cond Socket appear in the most repositories here.
Which microcontrollers do boards using the Pololu_Breakout_DRV8825 use?
Most are built on ESP32 (17), AVR/Arduino (13), NXP (5) and RP2040/RP2350 (4).
How big is a typical board using the Pololu_Breakout_DRV8825?
The median is 91.4 × 83.1 mm, and 89% are two-layer designs.
What is the most popular open source board using the Pololu_Breakout_DRV8825?
By GitHub stars, DropBear by speeduino, with 282 stars.
Can I simulate one of these boards using the Pololu_Breakout_DRV8825 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.