FanFDD
idlehandsdev·fanFDD·PCB/fanfdd.kicad_pcb
About the FanFDD PCB
FanFDD is an open source Microchip SAM PCB design by idlehandsdev, published on GitHub. It is a 2-layer board measuring 88 × 88 mm, with 57 components from 30 distinct parts.
Its main chip is the SAMD21G18, from the Microchip SAM family. Other key parts include the 74AHC1G125, AP2112K-3.3V, ACS712 and OPA344. By type, the board carries 19 resistors, 15 capacitors, 6 connectors, 5 ICs, 4 diodes and 2 switches.
It belongs with the robotics & motion designs in this gallery.
From the project
The firmware and CAD for the neural network fan fault detector.
Main components on the FanFDD
FanFDD bill of materials (BOM)
57 components, 30 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 74AHC1G125 | sot23-5 | U1 |
| 1 | SAMD21G18 | TQFP-48_7x7mm_Pitch0.5mm | U2 |
| 1 | AP2112K-3.3V | SOT-23-5 | U3 |
| 1 | ACS712 | SOIC-8-N | U4 |
| 1 | OPA344 | sot23-5 | U5 |
| 1 | Q_PMOS_DSG | DMG2307L | Q1 |
| 1 | Crystal_Small | crystal_smd_3.20x1.50mm2 | Y1 |
| 1 | USB_OTG | USB_Micro-B | P1 |
| 1 | CONN_01X04 | Pin_Header_Angled_1x04 | P2 |
| 1 | THERM | TerminalBlock_Pheonix_PT-3.5mm_2pol | P3 |
| 1 | MOTOR | TerminalBlock_Pheonix_PT-3.5mm_2pol | P4 |
| 1 | CONN_02X06 | Pin_Header_Straight_2x06_Pitch2.54mm | P5 |
| 1 | DBG_CONN | Atmel_ICE_Connector_02x05 | P17 |
| 1 | 500MA 500mA | c_1206 | F1 |
| 2 | POT | Potentiometer_Bourns_3296W_3-8Zoll_Inline_ScrewUp | RV1, RV2 |
| 1 | MOTOR_SW | OS102011MS2QN1 Slide Switch | SW1 |
| 1 | SW_PUSH | PTS-LFS | SW4 |
| 4 | LED | LED-0603 | D1, D2, D3, D4 |
| 1 | FB - 30Ohm | R_SM0603 | L1 |
| 8 | 0.1UF 0.1uF | C_0805 | C1, C3, C5, C10, C11, C12, C13, C15 |
Show 10 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 15PF 15pF | C_0402_Hand | C2, C4 |
| 2 | 2.2UF 2.2uF | C_0805 | C6, C9 |
| 1 | 100PF 100pF | C_0805 | C7 |
| 1 | 1UF 1uF | C_0805 | C8 |
| 1 | 1000PF 1000pF | C_0805 | C14 |
| 1 | 100K 100k | R_0805 | R1 |
| 1 | 330 | R_0805 | R2 |
| 1 | 10K 10k | R_0805 | R3 |
| 2 | 47K | R_0805 | R4, R6 |
| 14 | 1k | R_0805 | R5, R7, R8, R9, R10, R11, R12, R13 +6 |
FanFDD design files
The KiCad project lives in the idlehandsdev/fanFDD repository on GitHub; these links point at the commit this page was built from.
- LayoutPCB/fanfdd.kicad_pcb
- BOMPCB/BOM.xlsx
FanFDD: common questions
What microcontroller does the FanFDD use?
The FanFDD is built around the SAMD21G18, from the Microchip SAM family.
How big is the FanFDD PCB?
The FanFDD measures 88 × 88 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the FanFDD?
57 components, from 30 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the FanFDD design files?
From the idlehandsdev/fanFDD repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the FanFDD design in my own project?
The repository has no license, so all rights stay with idlehandsdev. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the FanFDD without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Microchip SAM firmware against it before you order a PCB.
Similar boards
Microchip SAM
Microcontroller Expansion Card
FrameworkComputer
26 × 30 mm24 parts2LCC-BY-4.01.1kMicrochip SAM
Taco Raven
VoronDesign
120 × 113 mm349 parts4LGPL-3.01.1kMicrochip SAM
Fpgaboy
Wren6991
50 × 50 mm89 parts4LNo license511Microchip SAM
OpenDropV4
GaudiLabs
124 × 115.4 mm118 parts2LGPL-3.0487Microchip SAM
ModulAdapter universal
GaudiLabs
100 × 69.5 mm45 parts2LGPL-3.0487Microchip SAM
Kira
kiibohd
366.9 × 114.3 mm400 partsCERN-OHL-1.2416