1 open source board using the SAMD21G18
Real designs built with the SAMD21G18, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
idlehandsdevThe SAMD21G18 in open source designs
The gallery holds 1 open source boards using the SAMD21G18 from 1 GitHub repository; a typical one measures about 60 × 75 mm and carries around 53 components.
100% are two-layer designs, the rest use four layers or more, and 0% carry an open source license.
The most starred is Makennbot by idlehandsdev.
Microcontrollers on boards using the SAMD21G18
What boards using the SAMD21G18 are built for
SAMD21G18: common questions
Where can I find a SAMD21G18 reference design?
Each of the 1 boards on this page is a real design using the SAMD21G18. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the SAMD21G18 use?
Most are built on Microchip SAM (1).
How big is a typical board using the SAMD21G18?
The median is 60 × 75 mm, and 100% are two-layer designs.
What is the most popular open source board using the SAMD21G18?
By GitHub stars, Makennbot by idlehandsdev, with 175 stars.
Can I simulate one of these boards using the SAMD21G18 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.