HardLabs

Esp32-c3-board

ieb·N2KNMEA0183Wifi·pcb/esp32-c3-board/esp32-c3-board.kicad_pcb

Esp32-c3-board layout, top view — open source ESP32 board by ieb

About the Esp32-c3-board

Esp32-c3-board is an open source ESP32 PCB design by ieb, published on GitHub. It is a 2-layer board measuring 94.9 × 40.6 mm, with 28 components from 21 distinct parts.

Its main chip is the esp32-c3-ebay, from the ESP32 family. Other key parts include the LP2985-3.3, PC817, DCDCConverter, STIS0621 and TJA1050. By type, the board carries 7 capacitors, 6 ICs, 5 diodes, 5 resistors and 2 connectors.

It belongs with the iot & wireless and power & battery designs in this gallery.

From the project

Exposes NMEA2000 and BMS data over BLE for Apps to use. Also supports Wifi/http/tcp/udp services.

There are 2 variant, one for an ESP32 WROOM board and one for ESP32-C3 boards. 2 PCBs for the later one using the 18n pin waveshare module and the other using a generic 16 pin module from ebay.

The BMS serial is isolated with a pair of 6N137s as 0v of the BMS will likely not be 0V of the Canbus due to current flowing from the battery pack. The device is powered from the canbus which is driven through a TJ1050. The preferred board is one of the ESP32-C3 boards which are more compact and better designed.

Main components on the Esp32-c3-board

esp32-c3-ebayLP2985-3.3PC817DCDCConverterSTIS0621TJA1050

Esp32-c3-board bill of materials (BOM)

28 components, 21 distinct parts.

QtyPartRefs
1
esp32-c3-ebay
U2
1
LP2985-3.3
U3
1
PC817
U4
1
DCDCConverter
U5
1
STIS0621
U7
1
TJA1050
U102
1
CAN
P101
1
BMS UART
P102
2
Thermistor
TH1, TH2
1
500mA Thermistor
TH201
3
SMBJ30CA-TR TSV
D101, D102, D203
2
1N5819
D105, D204
3
10uF
C1, C5, C7
1
10nF
C6
1
100nF
C105
1
100uF
C205
1
1uF
C206
1
3.3K
R1
1
2.2K
R2
2
10K
R6, R8
Show 1 more
QtyPartRefs
1
22K
R7

Esp32-c3-board design files

The KiCad project lives in the ieb/N2KNMEA0183Wifi repository on GitHub; these links point at the commit this page was built from.

Esp32-c3-board: common questions

What microcontroller does the Esp32-c3-board use?

The Esp32-c3-board is built around the esp32-c3-ebay, from the ESP32 family.

How big is the Esp32-c3-board?

The Esp32-c3-board measures 94.9 × 40.6 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Esp32-c3-board?

28 components, from 21 distinct parts. The full bill of materials is listed on this page.

Where can I download the Esp32-c3-board design files?

From the ieb/N2KNMEA0183Wifi repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Esp32-c3-board design in my own project?

The repository has no license, so all rights stay with ieb. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Esp32-c3-board without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

More boards in N2KNMEA0183Wifi

Similar boards