ESP32-S3-testboard

Imdad2005·ESP32-S3-testboard·hardware/ESP32-S3-testboard.kicad_pcb

ESP32-S3-testboard PCB layout, top view — open source ESP32 board by Imdad2005

About the ESP32-S3-testboard PCB

ESP32-S3-testboard is an open source ESP32 PCB design by Imdad2005, published on GitHub. It is a 4-layer board measuring 50 × 50 mm, with 38 components from 25 distinct parts.

Its main chip is the ESP32-S3-WROOM-1, from the ESP32 family. Other key parts include the USBLC6-2SC6, LM1117MP-3.3 and SI7021-A20. By type, the board carries 11 resistors, 8 capacitors, 6 diodes, 4 ICs, 4 connectors and 3 switches.

It belongs with the iot & wireless and sensors designs in this gallery.

From the project

Custom 4-layer ESP32-S3 IoT testboard designed in KiCad 9, featuring USB-C, 3.3 V power regulation, environmental sensing, and QWIIC/SPI expansion.

A custom ESP32-S3 test and development board designed in KiCad 9 for embedded systems and IoT prototyping. Integrates the ESP32-S3-WROOM-1 module with power regulation, onboard sensing, programming interfaces, and peripheral expansion on a compact 50 × 50 mm PCB.

- ESP32-S3-WROOM-1 — Wi-Fi + Bluetooth module, 8 MB flash - USB-C — power and programming interface with ESD protection - Si7021-A20 — onboard temperature and humidity sensor - QWIIC connector — I2C expansion for external sensors - BOOT / RESET / User buttons - RGB LED and 3.3 V power indicator LED - 2×5 SPI expansion header - 2×3…

ESP32-S3-testboard, from the project README
From the project README

Main components on the ESP32-S3-testboard

ESP32-S3-testboard bill of materials (BOM)

38 components, 25 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
USBLC6-2SC6
U1
1
ESP32-S3-WROOM-1
U2
1
LM1117MP-3.3
U3
1
SI7021-A20
Si7021-A20
U4
1
USB_C_RECEPTACLE_USB2.0_16P
USB_C_Receptacle_USB2.0_16P
J1
1
PIN_2X5
Pin_2x5
J2
1
CONN_02X03_ODD_EVEN
Conn_02x03_Odd_Even
J3
1
CONN_01X04
Conn_01x04
J4
1
Polyfuse 1A
F1
1
RST
SW1
1
USER_SW
SW2
1
BOOT
SW3
1
1N5817
D1
3
ESD3.3
D2, D5, D6
1
GREEN
D3
1
CLV1L-FKB
D4
1
BLM21PG220
FB1
1
10U
10u
C1
3
100N
100n
C2, C3, C7
2
1u
C4, C8
Show 5 more
QtyPartRefs
2
22U
22u
C5, C6
3
10K
R1, R4, R6
2
5.1K
5.1k
R2, R3
4
1k
R5, R7, R8, R9
2
2.2K
2.2k
R10, R11

ESP32-S3-testboard design files

The KiCad project lives in the Imdad2005/ESP32-S3-testboard repository on GitHub; these links point at the commit this page was built from.

ESP32-S3-testboard: common questions

What microcontroller does the ESP32-S3-testboard use?

The ESP32-S3-testboard is built around the ESP32-S3-WROOM-1, from the ESP32 family.

How big is the ESP32-S3-testboard PCB?

The ESP32-S3-testboard measures 50 × 50 mm, has 4 copper layers and is 1.582 mm thick.

How many components are on the ESP32-S3-testboard?

38 components, from 25 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the ESP32-S3-testboard design files?

From the Imdad2005/ESP32-S3-testboard repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the ESP32-S3-testboard design in my own project?

The repository has no license, so all rights stay with Imdad2005. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the ESP32-S3-testboard without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards