19 open source boards using the Si7021-A20

Real designs built with the Si7021-A20, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

19 boardsClear filters|Most starred

How designs wire the Si7021-A20

Read from the KiCad layouts of 17 open source designs, one per repository: what each pin of the Si7021-A20 connects to, and the resistors, capacitors and other passives placed on it.

  • The VDD pin has a decoupling capacitor on 15 of 17 designs, most often 100 nF (then 22 µF).
  • The SDA pin has a pull-up to 3.3V on 12 of 17 designs, most often 4.7 kΩ (then 10 kΩ).
  • The SCL pin has a pull-up to 3.3V on 12 of 17 designs, most often 4.7 kΩ (then 10 kΩ).
SDApin 1Connected to: The microcontroller 76%, a connector 59%
  • Pull-up to 3.3V on 71% · 4.7 kΩ (6), 10 kΩ (2), 2.2 kΩ (2)
GNDpin 2Connected to: GND 86%
NCpin 3, 4Connected to: Not connected 86%
VDDpin 5Connected to: 3.3V 88%
  • Decoupling capacitor on 88% · 100 nF (14), 22 µF (3), 1 µF (3)
SCLpin 6Connected to: The microcontroller 76%, a connector 53%
  • Pull-up to 3.3V on 71% · 4.7 kΩ (6), 10 kΩ (2), 2.2 kΩ (2)

1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Iot thing by mortens-lab, EnvOpenClock by Envious-Data, Esp8266-temperature humidity by amadeuspzs and Ikea fyrtur by mjuhanne.

The Si7021-A20 in open source designs

The gallery holds 19 open source boards using the Si7021-A20 from 18 GitHub repositories; a typical one measures about 79 × 53.5 mm and carries around 58 components.

50% are two-layer designs, the rest use four layers or more, and 42% carry an open source license.

The most starred is Iot thing 11 by mortens-lab.

Si7021-A20: common questions

Where can I find a Si7021-A20 reference design?

Each of the 19 boards on this page is a real design using the Si7021-A20. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the Si7021-A20 VDD pin?

The VDD pin has a decoupling capacitor on 15 of 17 designs, most often 100 nF (then 22 µF). Counted from the KiCad layouts of 17 open source designs using the Si7021-A20.

What pull-up resistor is used on the Si7021-A20 SDA pin?

The SDA pin has a pull-up to 3.3V on 12 of 17 designs, most often 4.7 kΩ (then 10 kΩ). Counted from the KiCad layouts of 17 open source designs using the Si7021-A20.

What pull-up resistor is used on the Si7021-A20 SCL pin?

The SCL pin has a pull-up to 3.3V on 12 of 17 designs, most often 4.7 kΩ (then 10 kΩ). Counted from the KiCad layouts of 17 open source designs using the Si7021-A20.

What parts are used alongside the Si7021-A20?

The CP2104, ESP32-WROOM-32D, USBLC6-2P6, 74AHCT245 and ESP-12F appear in the most repositories here.

Which microcontrollers do boards using the Si7021-A20 use?

Most are built on ESP32 (10), ESP8266 (3), Nordic nRF (1) and RP2040/RP2350 (1).

How big is a typical board using the Si7021-A20?

The median is 79 × 53.5 mm, and 50% are two-layer designs.

What is the most popular open source board using the Si7021-A20?

By GitHub stars, Iot thing 11 by mortens-lab, with 51 stars.

Can I simulate one of these boards using the Si7021-A20 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part