Lw6017r
ImTheSquid·lw6017r·lw6017rWifi/lw6017rWifi.kicad_pcb
About the Lw6017r PCB
Lw6017r is an open source ESP32 PCB design by ImTheSquid, published on GitHub. It is a 2-layer board measuring 80 × 66 mm, with 62 components from 33 distinct parts.
Its main chip is the ESP32-S3-WROOM-1, from the ESP32 family. Other key parts include the TXB0104D, HDSM-441W, AZ1117ID-3.3TRG1, TSOP382xx and TPD3E001DRLR. By type, the board carries 24 resistors, 10 diodes, 10 capacitors, 8 ICs, 6 switches and 3 connectors.
It belongs with the iot & wireless designs in this gallery.
From the project
A custom PCB to control my LG LW6017R A/C unit through Wi-Fi
Main components on the Lw6017r
Lw6017r bill of materials (BOM)
62 components, 33 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-S3-WROOM-1 | ESP32-S3-WROOM-1 | U1 |
| 1 | TXB0104D | SOIC-14_3.9x8.7mm_P1.27mm | U2 |
| 1 | HDSM-441W | HDSM-441B_HDSM-443B | U3 |
| 1 | AZ1117ID-3.3TRG1 | TO-252-2 | U4 |
| 1 | TSOP382xx | Vishay_MINICAST-3Pin | U5 |
| 2 | TPD3E001DRLR | SOT-553 | U6, U8 |
| 1 | FT230XQ | QFN-16-1EP_4x4mm_P0.65mm_EP2.1x2.1mm | U7 |
| 1 | 353630860 | CON_353630860 | J1 |
| 2 | USB_C_Receptacle_USB2.0_16P | USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J2, J3 |
| 1 | Buzzer | Buzzer_12x9.5RM7.6 | BZ1 |
| 1 | POWER | SW_PUSH_6mm | SW1 |
| 1 | MODE | SW_PUSH_6mm | SW2 |
| 1 | TIMER | SW_PUSH_6mm | SW3 |
| 1 | FAN_SPEED | SW_PUSH_6mm | SW4 |
| 1 | TEMP_UP | SW_PUSH_6mm | SW5 |
| 1 | TEMP_DN | SW_PUSH_6mm | SW6 |
| 1 | COOL | LED_D5.0mm | D1 |
| 1 | E_SAVER | LED_D5.0mm | D2 |
| 1 | FAN | LED_D5.0mm | D3 |
| 1 | DRY | LED_D5.0mm | D4 |
Show 13 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | F_REMIND | LED_D5.0mm | D5 |
| 1 | TIMER | LED_D5.0mm | D6 |
| 2 | D_TVS | D_SOD-882 | D7, D8 |
| 2 | D | D_SOD-323 | D9, D10 |
| 1 | 10uF | C_0805_2012Metric | C1 |
| 1 | 22uF | C_0805_2012Metric | C2 |
| 8 | 0.1uF | C_0402_1005Metric | C3, C4, C5, C6, C7, C8, C9, C10 |
| 4 | 120 | R_0402_1005Metric | R1, R2, R3, R4 |
| 4 | 5.1K | R_0402_1005Metric | R5, R6, R23, R24 |
| 1 | 330 | R_0402_1005Metric | R7 |
| 1 | 100 | R_0402_1005Metric | R8 |
| 6 | 3.3k | R_0402_1005Metric | R9, R10, R11, R12, R13, R14 |
| 8 | 51 | R_0402_1005Metric | R15, R16, R17, R18, R19, R20, R21, R22 |
Lw6017r design files
The KiCad project lives in the ImTheSquid/lw6017r repository on GitHub; these links point at the commit this page was built from.
Lw6017r: common questions
What microcontroller does the Lw6017r use?
The Lw6017r is built around the ESP32-S3-WROOM-1, from the ESP32 family.
How big is the Lw6017r PCB?
The Lw6017r measures 80 × 66 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Lw6017r?
62 components, from 33 distinct parts. The full bill of materials is listed on this page.
Where can I download the Lw6017r design files?
From the ImTheSquid/lw6017r repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Lw6017r design in my own project?
The repository has no license, so all rights stay with ImTheSquid. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Lw6017r without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k