HardLabs

Driver cplex rp2040

iorodeo·panels_g4_single_pcb·driver_cplex_rp2040/driver_cplex_rp2040.kicad_pcb

Driver cplex rp2040 PCB layout, top view — open source RP2040/RP2350 board by iorodeo

About the Driver cplex rp2040 PCB

Driver cplex rp2040 is an open source RP2040/RP2350 PCB design by iorodeo, published on GitHub under the CC-BY-4.0 license. It is a 6-layer board measuring 40.2 × 40.2 mm, with 479 components from 21 distinct parts.

Its main chip is the RP2040, from the RP2040/RP2350 family. Other key parts include the AP2112K-3.3 and W25Q16JVUXIQ_TR. By type, the board carries 256 diodes, 158 resistors, 34 transistors, 20 capacitors, 5 connectors and 3 ICs.

From the project

G4 Panels single PCB designs

Prototype designs for a single PCB G4 panels variant.

Main components on the Driver cplex rp2040

AP2112K-3.3RP2040W25Q16JVUXIQ_TR

Driver cplex rp2040 bill of materials (BOM)

479 components, 21 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
AP2112K-3.3
U1
1
RP2040
U2
1
W25Q16JVUXIQ_TR
Winbond
U3
34
1xPNP and 1xNPN
Q1, Q2, Q3, Q4, Q5, Q6, Q7, Q8 +26
1
12MHz
Y1
2
Conn_01x05
J1, J2
2
Conn_01x05
J3, J4
1
Conn_01x04
J5
2
SW_Push
SW1, SW2
256
LED
D1, D2, D3, D4, D5, D6, D7, D8 +248
2
10uF
C1, C2
13
0.1uF
C3, C7, C8, C11, C12, C13, C14, C15 +5
2
20pF
C4, C5
3
1uF
C6, C9, C10
2
27.4
R1, R2
36
1k
R3, R4, R12, R13, R20, R21, R28, R29 +28
18
10k
R5, R9, R17, R25, R33, R41, R49, R57 +10
17
10
R6, R14, R22, R30, R38, R46, R54, R62 +9
34
15k
R7, R8, R15, R16, R23, R24, R31, R32 +26
34
330
R10, R11, R18, R19, R26, R27, R34, R35 +26
Show 1 more
QtyPartRefs
17
270
R142, R143, R144, R145, R146, R147, R148, R149 +9

Driver cplex rp2040 design files

The KiCad project lives in the iorodeo/panels_g4_single_pcb repository on GitHub; these links point at the commit this page was built from.

Driver cplex rp2040: common questions

What microcontroller does the Driver cplex rp2040 use?

The Driver cplex rp2040 is built around the RP2040, from the RP2040/RP2350 family.

How big is the Driver cplex rp2040 PCB?

The Driver cplex rp2040 measures 40.2 × 40.2 mm, has 6 copper layers and is 1.6 mm thick.

How many components are on the Driver cplex rp2040?

479 components, from 21 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Driver cplex rp2040 design files?

From the iorodeo/panels_g4_single_pcb repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Driver cplex rp2040 design in my own project?

Yes, under the terms of its CC-BY-4.0 license, which iorodeo chose for the repository.

Can I test firmware for the Driver cplex rp2040 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

More boards in panels_g4_single_pcb

Similar boards