HardLabs

Panel

iorodeo·panels_g4_single_pcb·driver_rp2040/panel.kicad_pcb

Panel PCB layout, top view — open source RP2040/RP2350 board by iorodeo

About the Panel PCB

Panel is an open source RP2040/RP2350 PCB design by iorodeo, published on GitHub under the CC-BY-4.0 license. It is a 6-layer board measuring 40.2 × 40.2 mm, with 391 components from 16 distinct parts.

Its main chip is the RP2040, from the RP2040/RP2350 family. Other key parts include the AP2112K-3.3 and W25Q128JVS. By type, the board carries 256 diodes, 96 resistors, 33 capacitors, 3 ICs and 3 connectors.

From the project

G4 Panels single PCB designs

Prototype designs for a single PCB G4 panels variant.

Main components on the Panel

AP2112K-3.3RP2040W25Q128JVS

Panel bill of materials (BOM)

391 components, 16 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
AP2112K-3.3
U2
1
RP2040
U5
1
W25Q128JVS
U6
2
Conn_01x05
J1, J2
1
USB_C_Receptacle_USB2.0
J5
256
LED
D1, D2, D3, D4, D5, D6, D7, D8 +248
2
20pF
C1, C2
10
0.1uF
C3, C4, C6, C7, C10, C11, C12, C13 +2
3
1uF
C5, C8, C9
16
200pF
C17, C18, C19, C20, C21, C22, C23, C24 +8
2
22uF
C38, C47
16
2k
R1, R2, R3, R4, R17, R18, R19, R20 +8
32
4.5k
R5, R6, R7, R8, R9, R11, R13, R15 +24
16
10k
R10, R12, R14, R16, R26, R28, R30, R32 +8
16
1k
R33, R34, R35, R36, R41, R42, R43, R44 +8
16
100
R37, R38, R39, R40, R45, R46, R47, R48 +8

Panel design files

The KiCad project lives in the iorodeo/panels_g4_single_pcb repository on GitHub; these links point at the commit this page was built from.

Panel: common questions

What microcontroller does the Panel use?

The Panel is built around the RP2040, from the RP2040/RP2350 family.

How big is the Panel PCB?

The Panel measures 40.2 × 40.2 mm, has 6 copper layers and is 1.6 mm thick.

How many components are on the Panel?

391 components, from 16 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Panel design files?

From the iorodeo/panels_g4_single_pcb repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Panel design in my own project?

Yes, under the terms of its CC-BY-4.0 license, which iorodeo chose for the repository.

Can I test firmware for the Panel without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

More boards in panels_g4_single_pcb

Similar boards