HardLabs

Panel rp2350 18x18

iorodeo·panels_g4_single_pcb·panel_rp2350_18x18/panel_rp2350_18x18.kicad_pcb

Panel rp2350 18x18 PCB layout, top view — open source RP2040/RP2350 board by iorodeo

About the Panel rp2350 18x18 PCB

Panel rp2350 18x18 is an open source RP2040/RP2350 PCB design by iorodeo, published on GitHub under the CC-BY-4.0 license. It is a 6-layer board measuring 45 × 45 mm, with 462 components from 21 distinct parts.

Its main chip is the RP2354B_80QFN, from the RP2040/RP2350 family. Other key parts include the APS6404L-3SQR, UCC27517 and AP2112K-3.3. By type, the board carries 324 diodes, 64 capacitors, 39 ICs, 26 resistors, 5 connectors and 2 switches.

From the project

G4 Panels single PCB designs

Prototype designs for a single PCB G4 panels variant.

Main components on the Panel rp2350 18x18

APS6404L-3SQRRP2354B_80QFNUCC27517AP2112K-3.3

Panel rp2350 18x18 bill of materials (BOM)

462 components, 21 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
APS6404L-3SQR
U1
1
RP2354B_80QFN
U2
36
UCC27517
U3, U4, U5, U6, U7, U8, U9, U10 +28
1
AP2112K-3.3
U39
1
ABM8-272-T3
Y1
1
Conn_01x04
J1
2
Conn_01x05
J2, J3
2
Conn_01x05
J4, J5
2
SW_Push
SW1, SW2
324
LED
D1, D2, D3, D4, D5, D6, D7, D8 +316
1
3.3uH
L1
2
15pF
C1, C2
48
100nF
C3, C6, C9, C10, C11, C12, C13, C14 +40
2
4.7uF
C4, C5
2
4.7uF
C7, C8
10
10uF
C55, C56, C57, C58, C59, C60, C61, C62 +2
2
10k
R1, R4
3
1k
R2, R3, R5
1
33
R6
2
27
R7, R8
Show 1 more
QtyPartRefs
18
270
R9, R10, R11, R12, R13, R14, R15, R16 +10

Panel rp2350 18x18 design files

The KiCad project lives in the iorodeo/panels_g4_single_pcb repository on GitHub; these links point at the commit this page was built from.

Panel rp2350 18x18: common questions

What microcontroller does the Panel rp2350 18x18 use?

The Panel rp2350 18x18 is built around the RP2354B_80QFN, from the RP2040/RP2350 family.

How big is the Panel rp2350 18x18 PCB?

The Panel rp2350 18x18 measures 45 × 45 mm, has 6 copper layers and is 1.6 mm thick.

How many components are on the Panel rp2350 18x18?

462 components, from 21 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Panel rp2350 18x18 design files?

From the iorodeo/panels_g4_single_pcb repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Panel rp2350 18x18 design in my own project?

Yes, under the terms of its CC-BY-4.0 license, which iorodeo chose for the repository.

Can I test firmware for the Panel rp2350 18x18 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

More boards in panels_g4_single_pcb

Similar boards