11 open source boards using the UCC27517

Real designs built with the UCC27517, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

11 boardsClear filters|Most starred

How designs wire the UCC27517

Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the UCC27517 connects to, and the resistors, capacitors and other passives placed on it.

  • The VDD pin has a decoupling capacitor on 4 of 5 designs, most often 100 nF (then 4.7 µF).
  • The OUT pin has a series resistor on 4 of 4 designs, most often 0 Ω (then 100 Ω).
  • The IN- pin is tied to GND on 3 of 4 designs.
VDDpin 1Connected to: 12V 60% · GND 20% · a signal 20%
  • Decoupling capacitor on 80% · 100 nF (5), 4.7 µF (2)
GNDpin 2Connected to: GND 80% · 3.3V 20%
IN-pin 4Connected to: GND 75% · a signal 25%
OUTpin 5Connected to: Signal 100%
  • Series resistor on 100% · 0 Ω (1), 100 Ω (1), 270 Ω (1)

1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Corevus toolboard by calithameridi, Bobbycar-FOC-hardware by bobbycar-graz, HPM6P41 BB by Alipay1 and Driver rp2350 by iorodeo.

The UCC27517 in open source designs

The gallery holds 11 open source boards using the UCC27517 from 5 GitHub repositories; a typical one measures about 45 × 45 mm and carries around 462 components.

82% use four copper layers or more, and 64% carry an open source license.

The most starred is Corevus toolboard panelize3 by calithameridi.

Parts used alongside the UCC27517

Microcontrollers on boards using the UCC27517

What boards using the UCC27517 are built for

UCC27517: common questions

Where can I find a UCC27517 reference design?

Each of the 11 boards on this page is a real design using the UCC27517. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the UCC27517 VDD pin?

The VDD pin has a decoupling capacitor on 4 of 5 designs, most often 100 nF (then 4.7 µF). Counted from the KiCad layouts of 5 open source designs using the UCC27517.

What resistor goes on the UCC27517 OUT pin?

The OUT pin has a series resistor on 4 of 4 designs, most often 0 Ω (then 100 Ω). Counted from the KiCad layouts of 5 open source designs using the UCC27517.

How is the UCC27517 IN- pin connected?

The IN- pin is tied to GND on 3 of 4 designs. Counted from the KiCad layouts of 5 open source designs using the UCC27517.

What parts are used alongside the UCC27517?

The LM5164DDA, TJA1051T-3 and TPS54302 appear in the most repositories here.

Which microcontrollers do boards using the UCC27517 use?

Most are built on RP2040/RP2350 (6), STM32 (2), AVR/Arduino (1) and ESP32 (1).

How big is a typical board using the UCC27517?

The median is 45 × 45 mm, and 18% are two-layer designs.

What is the most popular open source board using the UCC27517?

By GitHub stars, Corevus toolboard panelize3 by calithameridi, with 25 stars.

Can I simulate one of these boards using the UCC27517 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part