ESP32 S3 DEVKIT EL V1
iSebass·TourisTech·ESP32_S3_DEVKIT_EL_V1_PCBWay Community/ESP32_S3_DEVKIT_EL_V1.kicad_pcb
About the ESP32 S3 DEVKIT EL V1 PCB
ESP32 S3 DEVKIT EL V1 is an open source ESP32 PCB design by iSebass, published on GitHub. It is a 2-layer board measuring 100 × 100.1 mm, with 81 components from 33 distinct parts.
Its main chip is the ESP32-S3-WROOM-1, from the ESP32 family. Other key parts include the CH340C, 3.3v 1A and RA-02. By type, the board carries 33 connectors, 14 capacitors, 12 resistors, 5 diodes, 4 ICs and 4 battery holders.
It belongs with the iot & wireless designs in this gallery.
From the project
En el contexto de un mundo cada vez más consciente de la importancia de la sostenibilidad y la conservación del medio ambiente, surge un proyecto visionario que busca revolucionar la industria del ecoturismo en Colombia. En este proyecto encontrarás la implementación de una red I
En el contexto de un mundo cada vez más consciente de la importancia de la sostenibilidad y la conservación del medio ambiente, surge un proyecto visionario que busca revolucionar la industria del ecoturismo en Colombia. En este proyecto encontrarás la implementación de una red IoT para monitorear y controlar dispositivos en un ecotel, uniendo la tecnología con la conservación del entorno natural.
Main components on the ESP32 S3 DEVKIT EL V1
ESP32 S3 DEVKIT EL V1 bill of materials (BOM)
81 components, 33 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | CH340C WCH | SOIC-16_3.9x9.9mm_P1.27mm | U1 |
| 1 | ESP32-S3-WROOM-1 Espressif Systems | ESP32-S3-WROOM-1 | U2 |
| 1 | 3.3v 1A Diodes Incorporated | SOT-223-3_TabPin2 | U3 |
| 1 | RA-02 | RA-02 | U4 |
| 2 | Q_NPN_BEC onsemi | SOT-23-3 | Q2, Q3 |
| 2 | 12,15,17,18,19,20,21,22 | PinHeader_1x08_P2.54mm_Vertical | J1, J15 |
| 2 | USB_B_Micro Molex | USB_Micro-B_Molex_47346-0001 | J2, J8 |
| 1 | LEDS | PinHeader_1x04_P2.54mm_Vertical | J3 |
| 2 | 4,5,6,7,8,9,10,11 | PinHeader_1x08_P2.54mm_Vertical | J4, J7 |
| 1 | 23,24,25,31 | PinHeader_1x04_P2.54mm_Vertical | J5 |
| 1 | Screw_Terminal_01x02 Phoenix Contact | TerminalBlock_Phoenix_MKDS-1,5-2_1x02_P5.00mm_Horizontal | J6 |
| 1 | ANSEL | RJ25_Wayconn_MJEA-660X1_Horizontal | J9 |
| 1 | BUTTONS | PinHeader_1x04_P2.54mm_Vertical | J10 |
| 2 | 5v | PinHeader_1x08_P2.54mm_Vertical | J11, J31 |
| 3 | RJ25 | RJ25_Wayconn_MJEA-660X1_Horizontal | J12, J13, J14 |
| 12 | ~ | PinHeader_1x04_P2.54mm_Vertical | J16, J17, J18, J19, J20, J21, J24, J25 +4 |
| 1 | GPIO | RJ25_Wayconn_MJEA-660X1_Horizontal | J22 |
| 1 | GPIO2 | RJ25_Wayconn_MJEA-660X1_Horizontal | J23 |
| 2 | GND | PinHeader_1x08_P2.54mm_Vertical | J30, J33 |
| 1 | Conn_01x03_Pin | PinHeader_1x03_P2.54mm_Vertical | J32 |
Show 13 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 4 | SW_Push C&K | SW_Tactile_SPST_NO_Straight_CK_PTS636Sx25SMTRLFS | BT1, BT2, BT3, BT4 |
| 3 | 100K Bourns Inc. | Potentiometer_Bourns_3386P_Vertical | RV1, RV2, RV3 |
| 4 | Blue LED Dialight | LED_1206_3216Metric | LED 1, LED 2, LED 3, LED 4 |
| 1 | Blue LED Dialight | LED_1206_3216Metric | D1 |
| 3 | D_Schottky STMicroelectronics | D_SMA | D11, D12, D13 |
| 1 | RED LED Dialight | LED_1206_3216Metric | D14 |
| 10 | 0.1 uF KEMET | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C3, C5, C6, C7, C8, C10, C11 +2 |
| 3 | 10 uF KEMET | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C2, C9, C12 |
| 1 | 1 uF KEMET | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C4 |
| 2 | 1K Panasonic Electronic Components | R_1206_3216Metric | R1, R2 |
| 6 | 330R Panasonic Electronic Components | R_1206_3216Metric | R3, R8, R9, R10, R11, R14 |
| 1 | 0R Panasonic Electronic Components | R_1206_3216Metric | R4 |
| 3 | 10K Panasonic Electronic Components | R_1206_3216Metric | R7, R12, R13 |
ESP32 S3 DEVKIT EL V1 design files
The KiCad project lives in the iSebass/TourisTech repository on GitHub; these links point at the commit this page was built from.
ESP32 S3 DEVKIT EL V1: common questions
What microcontroller does the ESP32 S3 DEVKIT EL V1 use?
The ESP32 S3 DEVKIT EL V1 is built around the ESP32-S3-WROOM-1, from the ESP32 family.
How big is the ESP32 S3 DEVKIT EL V1 PCB?
The ESP32 S3 DEVKIT EL V1 measures 100 × 100.1 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the ESP32 S3 DEVKIT EL V1?
81 components, from 33 distinct parts. The full bill of materials is listed on this page.
Where can I download the ESP32 S3 DEVKIT EL V1 design files?
From the iSebass/TourisTech repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the ESP32 S3 DEVKIT EL V1 design in my own project?
The repository has no license, so all rights stay with iSebass. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the ESP32 S3 DEVKIT EL V1 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in TourisTech
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k