8 open source boards using the Ra-02
Real designs built with the Ra-02, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
RP2040/RP2350
IoT AgriFarm
sudo-junkie
53.3 × 58.4 mm120 parts4LGPL-2.00ESP32
ESP32 S3 DEVKIT EL V1
iSebass
100 × 100.1 mm81 parts2LNo license0ESP32
Esp32-lora gps tracker
bogdan-kovalchuk
65 × 45 mm63 parts4LMIT0ESP32
Esp32-battery charging monitoring
bogdan-kovalchuk
62 × 50 mm60 parts4LMIT0Raspberry Pi
Estacao de Ignicao (THT) - LoRa 433 MHz
Serra-Rocketry
66 × 64 mm29 parts2LGPL-3.00ESP32
Estacao de Ignicao (SMD) - LoRa 433 MHz
Serra-Rocketry
85 × 70 mm29 parts2LGPL-3.00Raspberry Pi
Estação de Comando — Ignição LoRa 433 MHz
Serra-Rocketry
60 × 58 mm14 parts2LGPL-3.00STM32
LoRaModem
wangyeee
24 × 36 mm48 parts2LBSD-3-Clause9
How designs wire the Ra-02
Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the Ra-02 connects to, and the resistors, capacitors and other passives placed on it.
- The DI02 pin is left unconnected on 6 of 6 designs.
- The DI03 pin is left unconnected on 6 of 6 designs.
- The DI04 pin is left unconnected on 6 of 6 designs.
- The DI05 pin is left unconnected on 6 of 6 designs.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 1, 2, 9, 16 | Connected to: GND 100% | — |
| 3.3Vpin 3 | Connected to: 3.3V 83% · a signal 17% | — |
| DI01pin 6 | Connected to: Not connected 67% · a signal 33% | — |
| DI02pin 7 | Connected to: Not connected 100% | — |
| DI03pin 8 | Connected to: Not connected 100% | — |
| DI04pin 10 | Connected to: Not connected 100% | — |
| DI05pin 11 | Connected to: Not connected 100% | — |
| NSSpin 15 | Connected to: The microcontroller 83% |
|
5 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include LoRaModem by wangyeee, Esp32-battery charging monitoring by bogdan-kovalchuk, Esp32-lora gps tracker by bogdan-kovalchuk and ESP32 S3 DEVKIT EL V1 by iSebass.
The Ra-02 in open source designs
The gallery holds 8 open source boards using the Ra-02 from 6 GitHub repositories; a typical one measures about 63.5 × 58.2 mm and carries around 54 components.
63% are two-layer designs, the rest use four layers or more, and 88% carry an open source license.
The most starred is LoRaModem by wangyeee.
Parts used alongside the Ra-02
Microcontrollers on boards using the Ra-02
What boards using the Ra-02 are built for
Ra-02: common questions
Where can I find a Ra-02 reference design?
Each of the 8 boards on this page is a real design using the Ra-02. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the Ra-02 DI02 pin connected?
The DI02 pin is left unconnected on 6 of 6 designs. Counted from the KiCad layouts of 6 open source designs using the Ra-02.
How is the Ra-02 DI03 pin connected?
The DI03 pin is left unconnected on 6 of 6 designs. Counted from the KiCad layouts of 6 open source designs using the Ra-02.
How is the Ra-02 DI04 pin connected?
The DI04 pin is left unconnected on 6 of 6 designs. Counted from the KiCad layouts of 6 open source designs using the Ra-02.
What parts are used alongside the Ra-02?
The ESP32-S3-WROOM-1-N16R8, TPS3808G33DBVR and USBLC6-2SC6 appear in the most repositories here.
Which microcontrollers do boards using the Ra-02 use?
Most are built on ESP32 (4), Raspberry Pi (2), RP2040/RP2350 (1) and STM32 (1).
How big is a typical board using the Ra-02?
The median is 63.5 × 58.2 mm, and 63% are two-layer designs.
What is the most popular open source board using the Ra-02?
By GitHub stars, LoRaModem by wangyeee, with 9 stars.
Can I simulate one of these boards using the Ra-02 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.