TSI SmartVent KiCAD May2026

ishron256·TSI_SmartVent_KiCAD_May2026·PCBLayout/SmartVent_AdvancedPCB.kicad_pcb

TSI SmartVent KiCAD May2026 PCB layout, top view — open source ESP32 board by ishron256

About the TSI SmartVent KiCAD May2026 PCB

TSI SmartVent KiCAD May2026 is an open source ESP32 PCB design by ishron256, published on GitHub. It is a 4-layer board measuring 95 × 54.4 mm, with 45 components from 33 distinct parts.

Its main chip is the ESP32-S3-WROOM-1, from the ESP32 family. Other key parts include the LM7805S, LM317 and PC817. By type, the board carries 11 resistors, 8 connectors, 8 diodes, 8 capacitors, 5 ICs and 2 transistors.

From the project

This repository contains the KiCAD design documents for the TSI SmartVent project. All schematics, PCB layouts, libraries, and fabrication outputs are stored here and will be regularly updated.

This repository contains the KiCAD design documents for the TSI SmartVent project. All schematics, PCB layouts, libraries, and fabrication outputs are stored here and will be regularly updated.

1. Install KiCAD 8.x or later. 2. Clone this repository:

3. Open the project file (.kicadpro) in Schematic/` with KiCAD.

- Commit schematic and layout changes together where possible. - Export updated Gerbers and BOM to Outputs/ whenever a design revision is finalized. - Use descriptive commit messages referencing the design revision (e.g., Rev A – added power stage schematic). - Do not commit KiCAD…

Main components on the TSI SmartVent KiCAD May2026

TSI SmartVent KiCAD May2026 bill of materials (BOM)

45 components, 33 distinct parts.

QtyPartRefs
1
ESP32-S3-WROOM-1
U2
1
LM7805S
U10
1
LM317
U11
2
PC817
U13, U14
2
2N2222A
Q3, Q4
1
B2B-XH-A(LF)(SN)
2 Pin Conn
JST Sales America Inc.
J1
1
USB4085-GF-A_REVA4
J2
1
Micro_SD_Card
J3
1
B3B-XH-A(LF)(SN)
H Snsr 1
JST Sales America Inc.
J12
1
B3B-XH-A(LF)(SN)
H Snsr 2
JST Sales America Inc.
J14
1
B2B-XH-A(LF)(SN)
FAN 1
JST Sales America Inc.
J15
1
B2B-XH-A(LF)(SN)
FAN Ext
JST Sales America Inc.
J16
1
B2B-XH-A(LF)(SN)
FAN 2
JST Sales America Inc.
J17
1
Relay 2
K3
1
Relay 1
K4
1
1825967-1
S2
2
LED
D1, D6
2
Blue
D2, D3
2
LED
D5, D9
1
1N4007
D7
Show 13 more
QtyPartRefs
1
1N4007
D8
4
100nF
C1, C2, C5, C8
1
10uF
C3
1
.33uF
C4
2
1uF
C6, C7
1
5.1k
R1
3
10k
R9, R15, R16
2
560Ω
R10, R12
1
330Ω
R11
1
1k
R13
1
1k
R14
1
4700R
R17
1
10K
R18

TSI SmartVent KiCAD May2026 design files

The KiCad project lives in the ishron256/TSI_SmartVent_KiCAD_May2026 repository on GitHub; these links point at the commit this page was built from.

TSI SmartVent KiCAD May2026: common questions

What microcontroller does the TSI SmartVent KiCAD May2026 use?

The TSI SmartVent KiCAD May2026 is built around the ESP32-S3-WROOM-1, from the ESP32 family.

How big is the TSI SmartVent KiCAD May2026 PCB?

The TSI SmartVent KiCAD May2026 measures 95 × 54.4 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the TSI SmartVent KiCAD May2026?

45 components, from 33 distinct parts. The full bill of materials is listed on this page.

Where can I download the TSI SmartVent KiCAD May2026 design files?

From the ishron256/TSI_SmartVent_KiCAD_May2026 repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the TSI SmartVent KiCAD May2026 design in my own project?

The repository has no license, so all rights stay with ishron256. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the TSI SmartVent KiCAD May2026 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards