Main

ItzJannis·CoRoSoN-Package_Draft·Hardware/Main/Main.kicad_pcb

Main PCB layout, top view — open source ESP32 board by ItzJannis

About the Main PCB

Main is an open source ESP32 PCB design by ItzJannis, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 80 × 80 mm, with 49 components from 27 distinct parts.

Its main chip is the ESP32-WROOM 30-pin dev board, from the ESP32 family. Other key parts include the Switch, LM1117IMPX-3_3_NOPB, XT30_horizontal, Pfostenstecker_6_2x3 and Pfostenstecker_10_2x5. By type, the board carries 18 resistors, 11 ICs, 7 capacitors, 6 connectors and 2 LEDs.

From the project

Draft version to the official CoRoSoN-Kit.

Main components on the Main

Main bill of materials (BOM)

49 components, 27 distinct parts.

QtyPartRefs
1
Switch
U2
2
LM1117IMPX-3_3_NOPB
U3, U11
1
XT30_horizontal
U4
2
Pfostenstecker_6_2x3
U5, U6
1
Pfostenstecker_10_2x5
U7
1
BTN8982TAAUMA1
U8
1
ESP32-WROOM 30-pin dev board
U9
2
Pinhead_1x02H
U10, U12
1
XT30UPB-F
CN1
4
Pinhead_01x02_horizontal
J1, J2, J3, J4
1
Conn_02x04_Row_Letter_First
J5
1
Pinhead_1x03V
H1
1
Mot1
IFX1
1
Mot2
IFX2
1
Mot3
IFX3
1
Mot4
IFX4
1
led1
LED2
1
led2
LED3
3
SMD-220uF_50V
C1, C8, C10
2
SMD-100nF
C4, C9
Show 7 more
QtyPartRefs
1
RVT1A221M0605-C72494
C5
1
SMD-220uF
C6
9
SMD-10k
R2, R3, R5, R6, R7, R10, R14, R15 +1
1
SMD-100R
R8
6
SMD-220R
R9, R11, R12, R13, R16, R17
1
1k
R23
1
~
R78K1

Main design files

The KiCad project lives in the ItzJannis/CoRoSoN-Package_Draft repository on GitHub; these links point at the commit this page was built from.

Main: common questions

What microcontroller does the Main use?

The Main is built around the ESP32-WROOM 30-pin dev board, from the ESP32 family.

How big is the Main PCB?

The Main measures 80 × 80 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Main?

49 components, from 27 distinct parts. The full bill of materials is listed on this page.

Where can I download the Main design files?

From the ItzJannis/CoRoSoN-Package_Draft repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Main design in my own project?

Yes, under the terms of its GPL-3.0 license, which ItzJannis chose for the repository.

Can I test firmware for the Main without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

More boards in CoRoSoN-Package_Draft

Similar boards