3 open source boards using the Pfostenstecker_6_2x3

Real designs built with the Pfostenstecker_6_2x3, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

3 boardsClear filters|Most starred

The Pfostenstecker_6_2x3 in open source designs

The gallery holds 3 open source boards using the Pfostenstecker_6_2x3 from 2 GitHub repositories; a typical one measures about 80 × 80 mm and carries around 34 components.

100% are two-layer designs, the rest use four layers or more, and 67% carry an open source license.

The most starred is Main by ItzJannis.

Microcontrollers on boards using the Pfostenstecker_6_2x3

Pfostenstecker_6_2x3: common questions

Where can I find a Pfostenstecker_6_2x3 reference design?

Each of the 3 boards on this page is a real design using the Pfostenstecker_6_2x3. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the Pfostenstecker_6_2x3 use?

Most are built on ESP32 (2).

How big is a typical board using the Pfostenstecker_6_2x3?

The median is 80 × 80 mm, and 100% are two-layer designs.

What is the most popular open source board using the Pfostenstecker_6_2x3?

By GitHub stars, Main by ItzJannis, with 1 stars.

Can I simulate one of these boards using the Pfostenstecker_6_2x3 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part