The48ErrCar
iustinG-afk·The48ErrCar·hardware/The Big One.kicad_pcb
About the The48ErrCar PCB
The48ErrCar is an open source ESP32 PCB design by iustinG-afk, published on GitHub under the MIT license. It is a 2-layer board measuring 97.8 × 66.2 mm, with 74 components from 32 distinct parts.
Its main chip is the ESP32-S3-WROOM-1, from the ESP32 family. Other key parts include the TPS54331D, DRV8833PWP and AMS1117-1.5. By type, the board carries 24 resistors, 18 capacitors, 10 connectors, 6 transistors, 5 ICs and 4 diodes.
It belongs with the iot & wireless, robotics & motion and power & battery designs in this gallery.
From the project
ESP32-S3-WROOM-1 RC car controller PCB with Wi-Fi app control (KiCad, ESP-IDF, MIT App Inventor)
A custom-designed PCB that turns an RC car chassis into a Wi-Fi-controlled, sensor-equipped vehicle, driven from a mobile app built in MIT App Inventor.
I designed the board from scratch in KiCad, wrote the firmware in C (ESP-IDF) with the help of AI, hand-soldered every component, and built the control app. This was my first PCB project, so this repository also documents what went wrong and what I learned from it.

Main components on the The48ErrCar
The48ErrCar bill of materials (BOM)
74 components, 32 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-S3-WROOM-1 | ESP32-S3-WROOM-1 | U1 |
| 2 | TPS54331D | SOIC-8_3.9x4.9mm_P1.27mm | U2, U4 |
| 1 | DRV8833PWP | HTSSOP-16-1EP_4.4x5mm_P0.65mm_EP3.4x5mm_Mask2.46x2.31mm_ThermalVias | U3 |
| 1 | AMS1117-1.5 | SOT-223-3_TabPin2 | U5 |
| 6 | Q_NMOS_GDS | SOT-23 | Q1, Q2, Q3, Q4, Q5, Q6 |
| 5 | Conn_01x02 | PinHeader_1x02_P2.54mm_Vertical | J1, J3, J4, J5, J7 |
| 1 | USB_C_Receptacle_USB2.0_16P | USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J2 |
| 2 | Conn_01x03 | PinHeader_1x03_P2.54mm_Vertical | J6, J10 |
| 1 | Conn_01x24 | Hirose_FH12-24S-0.5SH_1x24-1MP_P0.50mm_Horizontal | J8 |
| 1 | Conn_01x04 | PinHeader_1x04_P2.54mm_Vertical | J9 |
| 1 | Buzzer | Buzzer_12x9.5RM7.6 | BZ1 |
| 1 | 3A | Fuse_1812_4532Metric | F1 |
| 1 | Conn_01x03 | PinHeader_1x03_P2.54mm_Vertical | J_Temp1 |
| 2 | SW_Push | SW_PUSH_6mm_H5mm | SW1, SW2 |
| 4 | D_Schottky | D_SMA | D1, D2, D3, D4 |
| 2 | 10u | L_Taiyo-Yuden_NR-60xx_HandSoldering | L1, L2 |
| 3 | 22u | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C1, C6, C15 |
| 3 | 100n | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2, C4, C13 |
| 3 | 10u | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C3, C8, C11 |
| 2 | 47n | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C5, C12 |
Show 12 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 2.2n | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C7, C14 |
| 1 | 2.2u | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C9 |
| 1 | 10n | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C10 |
| 1 | 1u | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C16 |
| 2 | 10uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C17, C18 |
| 12 | 10k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R4, R7, R8, R11, R12, R13, R15 +4 |
| 2 | 5.1k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2, R3 |
| 1 | 31.6k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R5 |
| 2 | 22k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R6, R9 |
| 1 | 52.3k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R10 |
| 4 | 220 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R14, R17, R19, R21 |
| 2 | 4.7k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R23, R24 |
The48ErrCar design files
The KiCad project lives in the iustinG-afk/The48ErrCar repository on GitHub; these links point at the commit this page was built from.
- Layouthardware/The Big One.kicad_pcb
- Schematichardware/The Big One.kicad_sch
The48ErrCar: common questions
What microcontroller does the The48ErrCar use?
The The48ErrCar is built around the ESP32-S3-WROOM-1, from the ESP32 family.
How big is the The48ErrCar PCB?
The The48ErrCar measures 97.8 × 66.2 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the The48ErrCar?
74 components, from 32 distinct parts. The full bill of materials is listed on this page.
Where can I download the The48ErrCar design files?
From the iustinG-afk/The48ErrCar repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the The48ErrCar design in my own project?
Yes, under the terms of its MIT license, which iustinG-afk chose for the repository.
Can I test firmware for the The48ErrCar without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8k