SBC3.1
About the SBC3.1 PCB
SBC3.1 is an open source PCB design by jacobtohahn, published on GitHub under the CERN-OHL-S-2.0 license. It is a 2-layer board measuring 127 × 96.5 mm, with 67 components from 28 distinct parts.
Other key parts include the Z80CPU, Z80SIO0, 28C256, Z80PIO and AS6C62256. By type, the board carries 24 resistors, 12 capacitors, 11 connectors, 9 ICs, 6 jumpers and 2 crystals.
It belongs with the retro computing designs in this gallery.
From the project
A Z80 computer system
Main components on the SBC3.1
SBC3.1 bill of materials (BOM)
67 components, 28 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Z80CPU | DIP-40_W15.24mm | U1 |
| 1 | Z80SIO0 | DIP-40_W15.24mm | U2 |
| 1 | 28C256 | DIP-28_W15.24mm | U3 |
| 1 | Z80PIO | DIP-40_W15.24mm | U4 |
| 1 | AS6C62256 | DIP-28_W15.24mm | U5 |
| 1 | Z80CTC | DIP-28_W15.24mm | U6 |
| 1 | 74HC139 | DIP-16_W7.62mm | U7 |
| 1 | ULN2803A | DIP-18_W7.62mm | U8 |
| 1 | 74HC138 | DIP-16_W7.62mm | U9 |
| 1 | SYS_CLK | Oscillator_DIP-8 | X1 |
| 1 | 1.8432MHz | Oscillator_DIP-8 | X2 |
| 1 | ZTO-80 Bus | PinHeader_2x20_P2.54mm_Vertical | J1 |
| 3 | Conn_01x02 | PinHeader_1x02_P2.54mm_Vertical | J2, J10, J11 |
| 1 | 5V_IN | BarrelJack_CUI_PJ-102A_Horizontal | J3 |
| 1 | CPUHDR | PinHeader_1x09_P2.54mm_Vertical | J4 |
| 1 | CTCHDR | PinHeader_1x08_P2.54mm_Vertical | J5 |
| 2 | SIOHDR | PinHeader_1x06_P2.54mm_Vertical | J6, J9 |
| 2 | PIOHDR | PinHeader_2x05_P2.54mm_Vertical | J7, J8 |
| 6 | Jumper_2_Open | PinHeader_1x02_P2.54mm_Vertical | JP1, JP2, JP3, JP4, JP5, JP6 |
| 1 | Reset | SW_PUSH_6mm | SW1 |
Show 8 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | PWR_LED | LED_D3.0mm | D1 |
| 1 | RUN_LED | LED_D3.0mm | D2 |
| 11 | 0.1u | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C1, C2, C3, C4, C5, C6, C7, C8 +3 |
| 1 | 10u | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C12 |
| 10 | 10k | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R1, R2, R4, R11, R12, R13, R14, R15 +2 |
| 2 | 220 | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R3, R5 |
| 8 | 2.2k | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R6, R8, R9, R10, R17, R19, R20, R21 |
| 4 | 100k | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R7, R16, R18, R22 |
SBC3.1 design files
The KiCad project lives in the jacobtohahn/ZTO-80 repository on GitHub; these links point at the commit this page was built from.
SBC3.1: common questions
How big is the SBC3.1 PCB?
The SBC3.1 measures 127 × 96.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the SBC3.1?
67 components, from 28 distinct parts. The full bill of materials is listed on this page.
Where can I download the SBC3.1 design files?
From the jacobtohahn/ZTO-80 repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the SBC3.1 design in my own project?
Yes, under the terms of its CERN-OHL-S-2.0 license, which jacobtohahn chose for the repository.
More boards in ZTO-80
SBC3.2
127 × 96.5 mm67 parts2LCERN-OHL-S-2.020
ZTO-80 SIO
99.1 × 57.2 mm32 parts2LCERN-OHL-S-2.020
ZTO-80 SBC Backplane 5
99.1 × 91.4 mm28 parts2LCERN-OHL-S-2.020
ZTO-80 Backplane 5
99.1 × 91.4 mm25 parts2LCERN-OHL-S-2.020
ZTO-80 CPU
99.1 × 57.2 mm24 parts2LCERN-OHL-S-2.020
ZTO-80 CTC
99.1 × 57.2 mm17 parts2LCERN-OHL-S-2.020
ZTO-80 Memory
99.1 × 57.2 mm10 parts2LCERN-OHL-S-2.020
ZTO-80 Template
99.1 × 57.2 mm4 parts2LCERN-OHL-S-2.020
Similar boards
Expansion Card Retrofit
FrameworkComputer
24 × 27.3 mm5 parts2LCC-BY-4.01.1k
Rgb to hdmi
hoglet67
77 × 97 mm67 parts2LGPL-3.01.0k
Buffer
53.9 × 23.2 mm13 parts2LGPL-3.01.0k
X1
121.9 × 81.3 mm51 parts2LGPL-3.01.0k
Amiga External
21.9 × 76.7 mm6 parts2LGPL-3.01.0k
Videoslotadapter
152 × 57.6 mm13 parts2LGPL-3.01.0k