OtterIron PRO Top
About the OtterIron PRO Top PCB
OtterIron PRO Top is an open source PCB design by Jana-Marie, published on GitHub. It is a 2-layer board measuring 50 × 20.5 mm, with 33 components from 14 distinct parts.
Other key parts include the USBLC6-4SC6 and STUSB4500QTR. By type, the board carries 16 connectors, 7 capacitors, 6 resistors, 2 ICs and 2 switches.
It belongs with the power & battery designs in this gallery.
From the project
USB-PD soldering station for JBC C245 handles.
Main components on the OtterIron PRO Top
OtterIron PRO Top bill of materials (BOM)
33 components, 14 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | USBLC6-4SC6 | SOT-23-6 | U1 |
| 1 | STUSB4500QTR | QFN-24-1EP_4x4mm_P0.5mm_EP2.7x2.7mm | U3 |
| 1 | USB_C_RECEPTACLE_USB2.0 USB_C_Receptacle_USB2.0 | USB-C 16Pin | J1 |
| 1 | OLED_64X32 OLED_64x32 | 0.69OLED | J2 |
| 1 | C245 Conn_01x01 | pad_1_2 | J3 |
| 5 | Conn_01x01 | pad_1_2 | J4, J7, J8, J9, J10 |
| 2 | Conn_01x01 | pad_0.75_3 | J5, J6 |
| 6 | Conn_01x01 | pad_1.5_3 | J11, J12, J13, J14, J15, J16 |
| 1 | KEY1 key1 | SW_SPST_EVQP7C | SW1 |
| 1 | KEY2 key2 | SW_SPST_EVQP7C | SW2 |
| 6 | C52923 1μF 25V | C_0603 | C12, C13, C14, C15, C19, C20 |
| 1 | C1525 0.1μF | C_0603 | C21 |
| 5 | 2K37 2k37 | R_0603 | R7, R10, R13, R23, R24 |
| 1 | 560K 560k | R_0603 | R11 |
OtterIron PRO Top design files
The KiCad project lives in the Jana-Marie/Otter-Iron-PRO repository on GitHub; these links point at the commit this page was built from.
OtterIron PRO Top: common questions
How big is the OtterIron PRO Top PCB?
The OtterIron PRO Top measures 50 × 20.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the OtterIron PRO Top?
33 components, from 14 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the OtterIron PRO Top design files?
From the Jana-Marie/Otter-Iron-PRO repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the OtterIron PRO Top design in my own project?
The repository has no license, so all rights stay with Jana-Marie. Use it as a reference, and ask the author before reusing the design.
More boards in Otter-Iron-PRO
Similar boards
Stack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7k
Display Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7k
ControllerCurrentShuntAddOn
stuartpittaway
26 × 16.9 mm9 parts2LCC-BY-NC-4.01.1k
Module 16S PassiveBalanceAddOn
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k
TemperaturePCB PANEL
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1k
ProgrammingAdapter
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1k