Starbie.io

jaym267·Starbie.io·MyStarbie/starbie.kicad_pcb

Starbie.io PCB layout, top view — open source ESP32 board by jaym267

About the Starbie.io PCB

Starbie.io is an open source ESP32 PCB design by jaym267, published on GitHub. It is a 2-layer board measuring 95.8 × 82.1 mm, with 7 components from 6 distinct parts.

Its main chip is the XIAO-ESP32-C3-SMD, from the ESP32 family. Other key parts include the DHT11. By type, the board carries 2 ICs, 2 connectors, 2 switches and 1 resistor.

It belongs with the sensors, keyboards and displays & leds designs in this gallery.

From the project

a tiny motion control digital pet that lives on a star-shaped PCB ##Hardware - Seeed XIAO ESP32-C3: the microcontroller that runs everything - 0.96" SSD1306 OLED (128x64): the screen Starbie lives on - MPU6050: accelerometer/gyro for tilt and shake controls - DHT11: temperature a

a tiny motion control digital pet that lives on a star-shaped PCB ##Hardware - Seeed XIAO ESP32-C3: the microcontroller that runs everything - 0.96" SSD1306 OLED (128x64): the screen Starbie lives on - MPU6050: accelerometer/gyro for tilt and shake controls - DHT11: temperature and humidity sensor - 2 Cherry MX switches: buttons for the menu and stats screen - 10k resistor: pull-up for the DHT11

Starbie.io, from the project README
From the project README

Main components on the Starbie.io

Starbie.io bill of materials (BOM)

7 components, 6 distinct parts.

QtyPartRefs
1
XIAO-ESP32-C3-SMD
U1
1
DHT11
U2
1
Conn_01x04_Pin
J1
1
Conn_01x08_Pin
J2
2
SW_Push
SW1, SW2
1
10k
R1

Starbie.io design files

The KiCad project lives in the jaym267/Starbie.io repository on GitHub; these links point at the commit this page was built from.

Starbie.io: common questions

What microcontroller does the Starbie.io use?

The Starbie.io is built around the XIAO-ESP32-C3-SMD, from the ESP32 family.

How big is the Starbie.io PCB?

The Starbie.io measures 95.8 × 82.1 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Starbie.io?

7 components, from 6 distinct parts. The full bill of materials is listed on this page.

Where can I download the Starbie.io design files?

From the jaym267/Starbie.io repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Starbie.io design in my own project?

The repository has no license, so all rights stay with jaym267. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Starbie.io without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards