Hand minute
Jayweiii·Clockor·hardware/hand-minute/hand-minute.kicad_pcb
About the Hand minute PCB
Hand minute is an open source ESP32 PCB design by Jayweiii, published on GitHub. It is a 2-layer board measuring 159 × 22 mm, with 55 components from 11 distinct parts.
Its main chip is the ESP32-C3-MINI-1-N4, from the ESP32 family. Other key parts include the ME6211C33M5G-N and SN74AHCT125PWR. By type, the board carries 36 diodes, 4 capacitors, 3 ICs, 1 connector, 1 switch and 1 resistor.
From the project
Motor clock
Private KiCad 9 design package for a dual-mode POV / analog-style clock: base controller plus minute and hour LED hands.
- KiCad 9.0.7 (kicad-cli sch erc, pcb drc, exports) - CI: INTI-CMNB KiBot via .github/workflows/kibot.yml
Footprints are placed from the schematic netlist (scripts/placeandroute.py). Autorouting is not complete in the initial commit: the boxed freerouting-cli native build aborts mid-batch (GraalVM serialization on ComponentOutline). Boards are saved placed, unrouted; DRC will report unconnected items until routes/zones are finished. Follow-up commits may add SES import or…
Main components on the Hand minute
Hand minute bill of materials (BOM)
55 components, 11 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-C3-MINI-1-N4 | ESP32-C3-MINI-1 | U1 |
| 1 | ME6211C33M5G-N | SOT-23-5 | U2 |
| 1 | SN74AHCT125PWR | TSSOP-14_4.4x5mm_P0.65mm | U3 |
| 1 | SLIP_5V | PinHeader_1x04_P2.54mm_Vertical | J1 |
| 9 | 100nF | C_0603_1608Metric | Cd1, Cd2, Cd3, Cd4, Cd5, Cd6, Cd7, Cd8 +1 |
| 1 | BOOT | SW_SPST_CK_RS282G05A3 | SW1 |
| 36 | APA102-2020 | LED-APA102-2020 | D1, D2, D3, D4, D5, D6, D7, D8 +28 |
| 1 | 100nF | C_0603_1608Metric | C1 |
| 2 | 10uF | C_0805_2012Metric | C2, C4 |
| 1 | 22uF | C_0805_2012Metric | C3 |
| 1 | 10k | R_0603_1608Metric | R1 |
Hand minute design files
The KiCad project lives in the Jayweiii/Clockor repository on GitHub; these links point at the commit this page was built from.
Hand minute: common questions
What microcontroller does the Hand minute use?
The Hand minute is built around the ESP32-C3-MINI-1-N4, from the ESP32 family.
How big is the Hand minute PCB?
The Hand minute measures 159 × 22 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Hand minute?
55 components, from 11 distinct parts. The full bill of materials is listed on this page.
Where can I download the Hand minute design files?
From the Jayweiii/Clockor repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Hand minute design in my own project?
The repository has no license, so all rights stay with Jayweiii. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Hand minute without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in Clockor
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k