10 open source boards using the SN74AHCT125PWR

Real designs built with the SN74AHCT125PWR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

10 boardsClear filters|Most starred

How designs wire the SN74AHCT125PWR

Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the SN74AHCT125PWR connects to, and the resistors, capacitors and other passives placed on it.

  • The 1OE pin is tied to GND on 7 of 7 designs.
  • The 4Y pin is left unconnected on 6 of 7 designs.
  • The VCC pin has a decoupling capacitor on 5 of 7 designs, most often 100 nF (then 47 µF).
  • The 2OE pin is tied to GND on 5 of 7 designs (not connected on 2).
1OEpin 1Connected to: GND 100%
2OEpin 4Connected to: GND 71% · not connected 29%
GNDpin 7Connected to: GND 100%
3Ypin 8Connected to: Not connected 71% · a signal 29%
4Ypin 11Connected to: Not connected 86%
VCCpin 14Connected to: 5V 86%
  • Decoupling capacitor on 71% · 100 nF (5), 47 µF (1), 10 µF (1)

8 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Iot leddriver hw by 0xjmux, Esp32-led controller by arkandas, The Interchange Keyboard - Right Module by headblockhead and Hand hour by Jayweiii.

The SN74AHCT125PWR in open source designs

The gallery holds 10 open source boards using the SN74AHCT125PWR from 8 GitHub repositories; a typical one measures about 79.1 × 54 mm and carries around 57 components.

60% are two-layer designs, the rest use four layers or more, and 30% carry an open source license.

The most starred is Iot leddriver hw by 0xjmux.

Microcontrollers on boards using the SN74AHCT125PWR

SN74AHCT125PWR: common questions

Where can I find a SN74AHCT125PWR reference design?

Each of the 10 boards on this page is a real design using the SN74AHCT125PWR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the SN74AHCT125PWR 1OE pin connected?

The 1OE pin is tied to GND on 7 of 7 designs. Counted from the KiCad layouts of 7 open source designs using the SN74AHCT125PWR.

How is the SN74AHCT125PWR 4Y pin connected?

The 4Y pin is left unconnected on 6 of 7 designs. Counted from the KiCad layouts of 7 open source designs using the SN74AHCT125PWR.

What decoupling capacitors do designs use on the SN74AHCT125PWR VCC pin?

The VCC pin has a decoupling capacitor on 5 of 7 designs, most often 100 nF (then 47 µF). Counted from the KiCad layouts of 7 open source designs using the SN74AHCT125PWR.

What parts are used alongside the SN74AHCT125PWR?

The AHT20_C2757850, AMS1117-3.3, ESP32-S3-WROOM-1-N16R8 and TCA8418RTWR appear in the most repositories here.

Which microcontrollers do boards using the SN74AHCT125PWR use?

Most are built on ESP32 (7) and STM32 (1).

How big is a typical board using the SN74AHCT125PWR?

The median is 79.1 × 54 mm, and 60% are two-layer designs.

What is the most popular open source board using the SN74AHCT125PWR?

By GitHub stars, Iot leddriver hw by 0xjmux, with 9 stars.

Can I simulate one of these boards using the SN74AHCT125PWR before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part