RoyalNode

jb66dmg52h-dotcom·RoyalNode·hardware/kicad/RoyalNode/RoyalNode.kicad_pcb

RoyalNode PCB layout, top view — open source Nordic nRF board by jb66dmg52h-dotcom

About the RoyalNode PCB

RoyalNode is an open source Nordic nRF PCB design by jb66dmg52h-dotcom, published on GitHub. It is a 4-layer board measuring 97 × 87 mm, with 71 components from 43 distinct parts.

Its main chip is the XIAO nRF52840 socket C53202181 RC, from the Nordic nRF family. Other key parts include the BQ25798RQMR, LM66100DCKR, TPS61088RHLR, LTC4365 TSOT-23-8 RC and E22-900M33S. By type, the board carries 34 capacitors, 18 resistors, 6 connectors, 4 ICs, 3 transistors and 2 modules.

From the project

This folder contains the Git-tracked KiCad design for RoyalNode Rev A.

This folder contains the Git-tracked KiCad design for RoyalNode Rev A.

- KiCad 10.0 project scaffold created. - Root schematic is intentionally a capture placeholder. - PCB file contains the Rev A board outline, placement zones, RF corridor, and keepout notes. - Project-local symbols have been started in RoyalNode/libsymbols/RoyalNode.kicadsym. - Footprint release is controlled by RoyalNode/libfootprints/FOOTPRINTRELEASEMATRIXREVA.md. - Schematic capture should follow RoyalNode/SCHEMATICCAPTURESEEDREVA.csv. - Footprints, schematic nets, and routed copper still need to be captured from…

Main components on the RoyalNode

BQ25798RQMRLM66100DCKRTPS61088RHLRLTC4365 TSOT-23-8 RCXIAO nRF52840 socket C53202181 RCE22-900M33S

RoyalNode bill of materials (BOM)

71 components, 43 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
BQ25798RQMR
BQ25798 RQM0029A RC
Texas Instruments
U1
1
LM66100DCKR
LM66100 DCK0006A SC70-6 RC
Texas Instruments
U2
1
TPS61088RHLR
TPS61088 RHL0020A thermal vias RC
Texas Instruments
U3
1
LTC4365 TSOT-23-8 RC
Analog Devices
U4
1
XIAO nRF52840 socket C53202181 RC
Seeed Studio
MOD1
1
E22-900M33S
E22-900M33S C22399506 RC
EBYTE
MOD2
3
ISA170170N04LMDSXTMA1
Infineon PG-DSO-8-27 thermal vias RC
Infineon
Q1, Q2, Q3
2
XT30PW-M
XT30PW-M C431092 RC
AMASS
J1, J2
2
J_LOW_JST_GH_SM02B_GHS_TB_RC
JST
J3, J4
1
0732511150
SMA edge envelope
Molex
J5
1
J_LOW_JST_GH_SM04B_GHS_TB_RC
JST
J6
1
0483005.DR
Littelfuse 0483005.DR 1206 RC
Littelfuse
F1
1
KT-0603R
KT-0603R red LED
Hubei KENTO Elec
D1
1
XAL7070-222MEC
XAL7070-222MEC RC
Coilcraft
L1
1
XAL7030-222MEC
XAL7030-222MEC RC
Coilcraft
L2
12
10 uF 50 V
C200, C201, C202, C203, C204, C205, C206, C207 +4
4
100 nF 50 V
C212, C213, C214, C404
1
4.7 uF 25 V
C215
2
47 nF 50 V
C216, C217
1
1 nF 50 V
C218
Show 23 more
QtyPartRefs
4
22 uF 16 V
C400, C401, C500, C501
2
47 uF 10 V
C402, C403
1
2.2 uF
C405
1
100 nF
C406
1
47 nF
C407
1
4.7 nF
C408
1
1 uF 16 V
C502
1
330 uF 10 V polymer
C503
2
100 nF 16 V
C504, C505
1
1.78 MOhm 1%
R100
1
180 kOhm 0.1%
R101
1
40.2 kOhm 0.1%
R102
3
100 kOhm
R103, R403, R405
1
5.23 kOhm 1%
R200
1
30.1 kOhm 1%
R201
1
100 Ohm
R202
1
4.70 kOhm 1%
R203
3
10 kOhm
R204, R205, R206
1
2.2 kOhm 1%
R207
1
176 kOhm 0.1%
R400
1
56.0 kOhm 0.1%
R401
1
330 kOhm
R402
1
20.0 kOhm
R404

RoyalNode design files

The KiCad project lives in the jb66dmg52h-dotcom/RoyalNode repository on GitHub; these links point at the commit this page was built from.

RoyalNode: common questions

What microcontroller does the RoyalNode use?

The RoyalNode is built around the XIAO nRF52840 socket C53202181 RC, from the Nordic nRF family.

How big is the RoyalNode PCB?

The RoyalNode measures 97 × 87 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the RoyalNode?

71 components, from 43 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the RoyalNode design files?

From the jb66dmg52h-dotcom/RoyalNode repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the RoyalNode design in my own project?

The repository has no license, so all rights stay with jb66dmg52h-dotcom. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the RoyalNode without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Nordic nRF firmware against it before you order a PCB.

Similar boards