4 open source boards using the E22-900M33S
Real designs built with the E22-900M33S, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
RT Open GPS Board
rtymk
85 × 100 mm111 parts4LMIT0Nordic nRF
RoyalNode
jb66dmg52h-dotcom
97 × 87 mm71 parts4LNo license0STM32
Telemetry PCB V2
CohenMurray
70 × 70 mm50 parts4LNo license1NavPoTS-North
RuberDuck9
58.9 × 58.9 mm48 parts4LAGPL-3.00
The E22-900M33S in open source designs
The gallery holds 4 open source boards using the E22-900M33S from 4 GitHub repositories; a typical one measures about 77.5 × 78.5 mm and carries around 61 components.
100% use four copper layers or more, and 50% carry an open source license.
The most starred is Telemetry PCB V2 by CohenMurray.
Microcontrollers on boards using the E22-900M33S
What boards using the E22-900M33S are built for
E22-900M33S: common questions
Where can I find a E22-900M33S reference design?
Each of the 4 boards on this page is a real design using the E22-900M33S. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the E22-900M33S use?
Most are built on ESP32 (1), Nordic nRF (1) and STM32 (1).
How big is a typical board using the E22-900M33S?
The median is 77.5 × 78.5 mm, and 0% are two-layer designs.
What is the most popular open source board using the E22-900M33S?
By GitHub stars, Telemetry PCB V2 by CohenMurray, with 1 stars.
Can I simulate one of these boards using the E22-900M33S before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.