Mini car
jegor377·mini-car
About the Mini car PCB
Mini car is an open source ESP32 PCB design by jegor377, published on GitHub. It is a 4-layer board measuring 65 × 65 mm, with 85 components from 34 distinct parts.
Its main chip is the ESP32-WROOM-32E-N16, from the ESP32 family. Other key parts include the DW01+G, MIC5504-3.3YM5-TR and TB6612FNG. By type, the board carries 31 resistors, 25 capacitors, 8 transistors, 6 diodes, 5 ICs and 4 connectors.
From the project
Mini rc car
��# mini-car 
Main components on the Mini car
Mini car bill of materials (BOM)
85 components, 34 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | DW01+G | SOT95P280X145-6N | IC1 |
| 1 | MIC5504-3.3YM5-TR | SOT95P280X145-5N | IC4 |
| 2 | TB6612FNG | SSOP-24_5.3x8.2mm_P0.65mm | U1, U4 |
| 1 | ESP32-WROOM-32E-N16 | ESP32WROOM32EN16 | U2 |
| 6 | AO3420 | SOT95P280X125-3N | Q1, Q2, Q3, Q4, Q6, Q9 |
| 2 | MMSS8050-H-TP | SOT95P237X125-3N | Q7, Q8 |
| 1 | 10118194-0001LF | 101181940001LF | J1 |
| 1 | TP4056 | SOIC127P600X175-9N | J2 |
| 1 | CONN_01X02_SOCKET Conn_01x02_Socket | JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J4 |
| 1 | CONN_01X06_PIN Conn_01x06_Pin | PinHeader_1x06_P2.54mm_Vertical | J10 |
| 1 | ADXL345 | CC-14-1 | AC2 |
| 1 | AP22814AW5-7 | SOT95P285X130-5N | PS1 |
| 2 | 1571527-2 | 15715272 | S1, S2 |
| 1 | SW_Slide_DPDT | SS22T20 | SW1 |
| 1 | 100K 100k | Termistor_SMD | TH1 |
| 3 | RED | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D2, D6, D7 |
| 1 | GREEN | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D3 |
| 2 | WHITE | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D4, D5 |
| 4 | 1u | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C2, C3, C14 |
| 5 | 10U 10u | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C4, C11, C18, C22, C23 |
Show 14 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 0.1U 0.1u | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C5 |
| 14 | 100N 100n | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C6, C7, C8, C9, C10, C12, C13, C17 +6 |
| 1 | 100U 100u | CP_Elec_5x5.3 | C16 |
| 1 | 470 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1 |
| 3 | 1k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3, R4, R9 |
| 1 | 43K 43k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R5 |
| 1 | 180K 180k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R6 |
| 1 | 1.2K 1.2k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R7 |
| 1 | 0 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R8 |
| 12 | 10K 10k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R10, R14, R15, R18, R22, R26, R27, R28 +4 |
| 3 | 4.7K 4.7k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R11, R12, R25 |
| 2 | 120 68 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R13, R20 |
| 4 | 330 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R16, R17, R19, R23 |
| 2 | 320 120 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R21, R24 |
Mini car design files
The KiCad project lives in the jegor377/mini-car repository on GitHub; these links point at the commit this page was built from.
- Layoutprojekt.kicad_pcb
- Schematicprojekt.kicad_sch
- BOMprojekt_BOM.csv
Mini car: common questions
What microcontroller does the Mini car use?
The Mini car is built around the ESP32-WROOM-32E-N16, from the ESP32 family.
How big is the Mini car PCB?
The Mini car measures 65 × 65 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Mini car?
85 components, from 34 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Mini car design files?
From the jegor377/mini-car repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Mini car design in my own project?
The repository has no license, so all rights stay with jegor377. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Mini car without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k