3 open source boards using the INA241A2IDR

Real designs built with the INA241A2IDR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

3 boardsClear filters|Most starred

The INA241A2IDR in open source designs

The gallery holds 3 open source boards using the INA241A2IDR from 3 GitHub repositories; a typical one measures about 120 × 145 mm and carries around 71 components.

67% use four copper layers or more, and 33% carry an open source license.

The most starred is Three Phase Current Sensor by JennystonJ.

Parts used alongside the INA241A2IDR

Microcontrollers on boards using the INA241A2IDR

What boards using the INA241A2IDR are built for

INA241A2IDR: common questions

Where can I find a INA241A2IDR reference design?

Each of the 3 boards on this page is a real design using the INA241A2IDR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the INA241A2IDR use?

Most are built on STM32 (1).

How big is a typical board using the INA241A2IDR?

The median is 120 × 145 mm, and 33% are two-layer designs.

What is the most popular open source board using the INA241A2IDR?

By GitHub stars, Three Phase Current Sensor by JennystonJ, with 2 stars.

Can I simulate one of these boards using the INA241A2IDR before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part