AnalogBoard Rev3
jer-lil·tremolo-hardware·Rev_3/Analog_Board_Rev_3/AnalogBoard_Rev3.kicad_pcb
About the AnalogBoard Rev3 PCB
AnalogBoard Rev3 is an open source STM32 PCB design by jer-lil, published on GitHub. It is a 4-layer board measuring 59.5 × 114.5 mm, with 56 components from 35 distinct parts.
Its main chip is the STM32F030RCT6TR, from the STM32 family. Other key parts include the FT230XS-R, NCP1117LPST33T3G, MCP42050, NPN_BJTMMBT3904_SOT-23-3 and NSL-32. By type, the board carries 20 capacitors, 13 resistors, 11 ICs, 4 connectors, 3 diodes and 1 switch.
It belongs with the audio designs in this gallery, and the repository also holds 2 earlier revisions of it.
From the project
This is the hardware (PCB, MCAD) design for a tremolo pedal for guitar (or bass, synth, tonewheel organ, whatever you like). The firmware is here: https://github.com/jer-lil/tremolo-firmware/tree/main
This is the hardware (PCB, MCAD) design for a tremolo pedal for guitar (or bass, synth, tonewheel organ, whatever you like). The firmware is here: https://github.com/jer-lil/tremolo-firmware/tree/main
This tremolo packs a lot of features into a very small (Hammond 125B, 65x120mm) enclosure. Features include:
- All analog signal path - Full stereo, with dedicated 1/4" jacks - Harmonic tremolo - Continually adjustable LFO phase, allowing for sounds between mono/stereo/harmonic not found in other tremolo pedals (that I've discovered, please let me know if you know of any) - Envelope control -…
Main components on the AnalogBoard Rev3
AnalogBoard Rev3 bill of materials (BOM)
56 components, 35 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | FT230XS-R OPA2134 | DIP-8_W7.62mm | U1 |
| 1 | NCP1117LPST33T3G OPA2134 | DIP-8_W7.62mm | U2 |
| 2 | MCP42050 OPA2134 | DIP-8_W7.62mm | U3, U4 |
| 1 | NPN_BJTMMBT3904_SOT-23-3 OPA2134 | DIP-8_W7.62mm | U5 |
| 2 | NPN_BJTMMBT3904_SOT-23-3 NSL-32 | Luna_NSL-32_Vertical | U6, U9 |
| 3 | NSL-32 | Luna_NSL-32_Vertical | U7, U8, U12 |
| 1 | STM32F030RCT6TR NSL-32 | Luna_NSL-32_Vertical | U13 |
| 2 | Conn_01x06_Male | PinHeader_1x06_P2.54mm_Vertical | J1, J3 |
| 1 | Conn_01x10_Male | PinHeader_1x10_P2.54mm_Vertical | J2 |
| 1 | Conn_01x08_Male | PinHeader_1x08_P2.54mm_Vertical | J4 |
| 4 | 10K 50k | Potentiometer_Bourns_3386F_Vertical | RV1, RV2, RV3, RV4 |
| 1 | CON_01X02_PTH_2.54MM SW_DIP_x04 | SW_DIP_SPSTx04_Slide_6.7x11.72mm_W8.61mm_P2.54mm_LowProfile | SW1 |
| 1 | 1N914 | D_DO-35_SOD27_P7.62mm_Horizontal | D2 |
| 1 | LED_SINGLE-0603-GREEN 1N914 | D_DO-35_SOD27_P7.62mm_Horizontal | D3 |
| 1 | LED_SINGLE-0603-GREEN D_Zener | D_DO-34_SOD68_P7.62mm_Horizontal | D4 |
| 1 | 1UF 47n | C_Rect_L7.2mm_W4.5mm_P5.00mm_FKS2_FKP2_MKS2_MKP2 | C1 |
| 1 | 0.1UF 47n | C_Rect_L7.2mm_W4.5mm_P5.00mm_FKS2_FKP2_MKS2_MKP2 | C2 |
| 8 | 0.1UF 100n | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3, C9, C12, C13, C14, C16, C17, C18 |
| 2 | 10UF 1n | C_Rect_L7.2mm_W4.5mm_P5.00mm_FKS2_FKP2_MKS2_MKP2 | C4, C5 |
| 1 | 10UF 100n | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C6 |
Show 15 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 0.1UF 1n | C_Rect_L7.2mm_W4.5mm_P5.00mm_FKS2_FKP2_MKS2_MKP2 | C7, C8 |
| 1 | 10N 4.7u | CP_Radial_D5.0mm_P2.00mm | C10 |
| 1 | 1UF 47u | CP_Radial_D5.0mm_P2.00mm | C11 |
| 1 | 100N 100n | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C15 |
| 2 | 0.1UF 10u | C_1210_3225Metric_Pad1.33x2.70mm_HandSolder | C19, C20 |
| 1 | 560 1M | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1 |
| 1 | 330 1M | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2 |
| 1 | 330 470k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R3 |
| 1 | 470 470k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R4 |
| 1 | 100 3.3k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R5 |
| 2 | 100 470k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R6, R7 |
| 1 | 100 100k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R8 |
| 1 | 10K 10k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R9 |
| 1 | 10K 47k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R10 |
| 3 | 100 1k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R11, R12, R13 |
AnalogBoard Rev3 design files
The KiCad project lives in the jer-lil/tremolo-hardware repository on GitHub; these links point at the commit this page was built from.
AnalogBoard Rev3: common questions
What microcontroller does the AnalogBoard Rev3 use?
The AnalogBoard Rev3 is built around the STM32F030RCT6TR, from the STM32 family.
How big is the AnalogBoard Rev3 PCB?
The AnalogBoard Rev3 measures 59.5 × 114.5 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the AnalogBoard Rev3?
56 components, from 35 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the AnalogBoard Rev3 design files?
From the jer-lil/tremolo-hardware repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the AnalogBoard Rev3 design in my own project?
The repository has no license, so all rights stay with jer-lil. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the AnalogBoard Rev3 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
More boards in tremolo-hardware
Earlier revisions in the repo: AnalogBoard_Rev2, AnalogBoard_Rev0
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k