68 open source boards using the NCP1117LPST33T3G

Real designs built with the NCP1117LPST33T3G, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

68 boardsClear filters|Most starred

How designs wire the NCP1117LPST33T3G

Read from the KiCad layouts of 30 open source designs, one per repository: what each pin of the NCP1117LPST33T3G connects to, and the resistors, capacitors and other passives placed on it.

  • The VI pin has a decoupling capacitor on 17 of 30 designs, most often 10 µF (then 100 nF).
GNDpin 1Connected to: GND 77% · a signal 19%
VOpin 2Connected to: 3.3V 77% · a signal 20%
VIpin 3Connected to: 5V 70% · GND 17%
  • Decoupling capacitor on 57% · 10 µF (11), 100 nF (3), 100 µF (1)

1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Corne cherry by foostan, FreeDSP-aurora by freeDSP, Arduino ads129x by OpenElectronicsLab and 5V Development Board by efabless.

The NCP1117LPST33T3G in open source designs

The gallery holds 68 open source boards using the NCP1117LPST33T3G from 30 GitHub repositories; a typical one measures about 76.2 × 73.8 mm and carries around 84 components.

79% are two-layer designs, the rest use four layers or more, and 28% carry an open source license.

The most starred is Corne chocolate by foostan.

Microcontrollers on boards using the NCP1117LPST33T3G

NCP1117LPST33T3G: common questions

Where can I find a NCP1117LPST33T3G reference design?

Each of the 68 boards on this page is a real design using the NCP1117LPST33T3G. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the NCP1117LPST33T3G VI pin?

The VI pin has a decoupling capacitor on 17 of 30 designs, most often 10 µF (then 100 nF). Counted from the KiCad layouts of 30 open source designs using the NCP1117LPST33T3G.

What parts are used alongside the NCP1117LPST33T3G?

The RP2040, W25Q128JVSIQ, TPD4E05U06DQAR, 93C56 and AZ1117CH-1.8TRG1 appear in the most repositories here.

Which microcontrollers do boards using the NCP1117LPST33T3G use?

Most are built on RP2040/RP2350 (17), ESP32 (8), STM32 (2) and AVR/Arduino (1).

How big is a typical board using the NCP1117LPST33T3G?

The median is 76.2 × 73.8 mm, and 79% are two-layer designs.

What is the most popular open source board using the NCP1117LPST33T3G?

By GitHub stars, Corne chocolate by foostan, with 7,725 stars.

Can I simulate one of these boards using the NCP1117LPST33T3G before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part