Mw cart

jfryman·mw-cart

Mw cart PCB layout, top view — open source ESP32 board by jfryman

About the Mw cart PCB

Mw cart is an open source ESP32 PCB design by jfryman, published on GitHub. It is a 2-layer board measuring 83.8 × 51 mm, with 50 components from 27 distinct parts.

Its main chip is the ESP32-C3-WROOM-02, from the ESP32 family. Other key parts include the 74LVC08, AMS1117-3.3, 74LVC16245, 74LVC245 and S29GL064N. By type, the board carries 18 resistors, 17 capacitors, 8 ICs, 2 transistors, 2 connectors and 2 diodes.

It belongs with the iot & wireless and retro computing designs in this gallery.

From the project

MegaWiFi Mega Drive/Genesis Wi-Fi cartridge — Rev.C fork (TI TL16C550D UART, 20 MHz / 1.25 Mbaud). Upstream: gitlab.com/doragasu/mw-cart

What changed (2026-10-06, jfryman): the NXP SC16C550BIBS UART (U7) is out of stock everywhere, so Rev.C replaces it with the pin-compatible TI TL16C550DRHB (VQFN-32, RHB):

The TI part is rated to 20 MHz at 3.3 V, so the UART link runs at 1.25 Mbaud. Rev.C is not compatible with existing MegaWiFi ROMs or firmware: ROMs need UARTCLK 20 MHz in their 16c550.h`, and the ESP32 needs the Rev.C firmware from jfryman/mw-fw-rtos. Title blocks and silkscreen are marked Rev.C.

Mw cart, from the project README
From the project README

Main components on the Mw cart

74LVC08AMS1117-3.374LVC1624574LVC245S29GL064NTL16C550DRHBESP32-C3-WROOM-02

Mw cart bill of materials (BOM)

50 components, 27 distinct parts.

QtyPartRefs
1
74LVC08
U1
1
AMS1117-3.3
U2
2
74LVC16245
U3, U5
1
74LVC245
U4
1
S29GL064N
U6
1
TL16C550DRHB
U7
1
ESP32-C3-WROOM-02
U8
2
2N7002
Q1, Q2
1
20 MHz
Y1
1
MD-CART-FINGERS
P1
1
USB_C_Receptacle_USB2.0_16P
P2
1
KT-0603R
D1
1
1N5819WS
D2
10
100n
C1, C3, C4, C5, C6, C8, C9, C10 +2
2
22u
C2, C7
2
12p
C12, C13
1
10u
C15
2
1u
C16, C17
1
0R0
R1
1
NP
R2
Show 7 more
QtyPartRefs
6
10k
R3, R4, R9, R13, R14, R17
2
8k2
R5, R8
2
5k6
R6, R7
1
220
R10
2
2k2
R11, R12
2
5k1
R15, R16
1
1M
R18

Mw cart design files

The KiCad project lives in the jfryman/mw-cart repository on GitHub; these links point at the commit this page was built from.

Mw cart: common questions

What microcontroller does the Mw cart use?

The Mw cart is built around the ESP32-C3-WROOM-02, from the ESP32 family.

How big is the Mw cart PCB?

The Mw cart measures 83.8 × 51 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Mw cart?

50 components, from 27 distinct parts. The full bill of materials is listed on this page.

Where can I download the Mw cart design files?

From the jfryman/mw-cart repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Mw cart design in my own project?

The repository has no license, so all rights stay with jfryman. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Mw cart without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards