Breakout board for the iMac G3 donw converter board
About the Breakout board for the iMac G3 donw converter board
Breakout board for the iMac G3 donw converter board is an open source PCB design by JJaroll, published on GitHub under the LGPL-3.0 license. It is a 2-layer board measuring 88 × 39 mm, with 4 components from 4 distinct parts.
By type, the board carries 3 connectors and 1 module.
It belongs with the dev boards & breakouts and retro computing designs in this gallery.
From the project
Mod del iMac G3 slot-loading (M5521) con Raspberry Pi 5: PCB maestra unificada, placas individuales (J20, J22, Down Converter), bezel interior y visores 3D. Todo en español.
Convierte un iMac G3 DV (slot loading) en un equipo moderno: una Raspberry Pi 5 dentro de la carcasa que usa el tubo CRT original como monitor VGA, con sus altavoces y su botón de encendido. Reversible: no hay que cortar nada del iMac.
Este repositorio reúne la documentación en español, las tres placas del proyecto original traducidas, un PCB master unificado que reemplaza el cableado entre ellas, y visores 3D (HTML autónomo y STL) para revisarlo todo sin instalar nada.
Breakout board for the iMac G3 donw converter board bill of materials (BOM)
4 components, 4 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Fan_Tacho_PWM | FanPinHeader_1x04_P2.54mm_Vertical | M1 |
| 1 | Screw_Terminal_01x10 | TerminalBlock_Phoenix_PT-1,5-10-5.0-H_1x10_P5.00mm_Horizontal | J1 |
| 1 | Screw_Terminal_01x04 | TerminalBlock_Phoenix_PT-1,5-4-5.0-H_1x04_P5.00mm_Horizontal | J2 |
| 1 | Conn_02x12_Top_Bottom | Molex_Micro-Fit_3.0_43045-2400_2x12_P3.00mm_Horizontal | J7 |
Breakout board for the iMac G3 donw converter board design files
The KiCad project lives in the JJaroll/MacBerry-Pi repository on GitHub; these links point at the commit this page was built from.
Breakout board for the iMac G3 donw converter board: common questions
How big is the Breakout board for the iMac G3 donw converter board?
The Breakout board for the iMac G3 donw converter board measures 88 × 39 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Breakout board for the iMac G3 donw converter board?
4 components, from 4 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Breakout board for the iMac G3 donw converter board design files?
From the JJaroll/MacBerry-Pi repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Breakout board for the iMac G3 donw converter board design in my own project?
Yes, under the terms of its LGPL-3.0 license, which JJaroll chose for the repository.
More boards in MacBerry-Pi
Raspberry Pi Hat - iMac G3
65 × 56.5 mm32 parts2LLGPL-3.00
AVR/ArduinoJ2o Board
82.6 × 52.5 mm16 parts2LLGPL-3.00
AVR/ArduinoPlaca J20 - Adaptador VGA iMac G3 DV (traduccion al espanol)
82.6 × 52.5 mm16 parts2LLGPL-3.00
Raspberry Pi Hat Interface - iMac G3 J20
19.7 × 17.8 mm9 parts2LLGPL-3.00
Placa J22 - Adaptador iMac G3 DV (traduccion al espanol)
65 × 30 mm8 parts2LLGPL-3.00
Imac g3 slot loading J22 adapter board
65 × 30 mm8 parts2LLGPL-3.00
PCB imac unificado MASTER v5 (con corte para la Raspberry)
251.9 × 267 mm7 parts2LLGPL-3.00
Placa Down Converter - Breakout (traduccion al espanol)
88 × 39 mm4 parts2LLGPL-3.00
Similar boards
134pin 7-967288-1
rusefi
139.7 × 73.7 mm38 parts2LGPL-3.01.2k
Breakout 112pin Connector
174 × 58 mm39 parts2LGPL-3.01.2k
Eecv breakout
140.8 × 53.7 mm9 parts4LGPL-3.01.2k
Breakout 60pin EEC-IV
139.7 × 62.2 mm15 parts2LGPL-3.01.2k
88 Pin Vag Breakout
142 × 58 mm91 parts2LGPL-3.01.2k
Expansion Card Retrofit
FrameworkComputer
24 × 27.3 mm5 parts2LCC-BY-4.01.1k