Placa Down Converter - Breakout (traduccion al espanol)
About the Placa Down Converter - Breakout (traduccion al espanol)
Placa Down Converter - Breakout (traduccion al espanol) is an open source PCB design by JJaroll, published on GitHub under the LGPL-3.0 license. It is a 2-layer board measuring 88 × 39 mm, with 4 components from 4 distinct parts.
By type, the board carries 3 connectors and 1 module.
It belongs with the dev boards & breakouts and retro computing designs in this gallery.
From the project
Mod del iMac G3 slot-loading (M5521) con Raspberry Pi 5: PCB maestra unificada, placas individuales (J20, J22, Down Converter), bezel interior y visores 3D. Todo en español.
Convierte un iMac G3 DV (slot loading) en un equipo moderno: una Raspberry Pi 5 dentro de la carcasa que usa el tubo CRT original como monitor VGA, con sus altavoces y su botón de encendido. Reversible: no hay que cortar nada del iMac.
Este repositorio reúne la documentación en español, las tres placas del proyecto original traducidas, un PCB master unificado que reemplaza el cableado entre ellas, y visores 3D (HTML autónomo y STL) para revisarlo todo sin instalar nada.
Placa Down Converter - Breakout (traduccion al espanol) bill of materials (BOM)
4 components, 4 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Fan_Tacho_PWM | FanPinHeader_1x04_P2.54mm_Vertical | M1 |
| 1 | Screw_Terminal_01x10 | TerminalBlock_Phoenix_PT-1,5-10-5.0-H_1x10_P5.00mm_Horizontal | J1 |
| 1 | Screw_Terminal_01x04 | TerminalBlock_Phoenix_PT-1,5-4-5.0-H_1x04_P5.00mm_Horizontal | J2 |
| 1 | Conn_02x12_Top_Bottom | Molex_Micro-Fit_3.0_43045-2400_2x12_P3.00mm_Horizontal | J7 |
Placa Down Converter - Breakout (traduccion al espanol) design files
The KiCad project lives in the JJaroll/MacBerry-Pi repository on GitHub; these links point at the commit this page was built from.
Placa Down Converter - Breakout (traduccion al espanol): common questions
How big is the Placa Down Converter - Breakout (traduccion al espanol)?
The Placa Down Converter - Breakout (traduccion al espanol) measures 88 × 39 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Placa Down Converter - Breakout (traduccion al espanol)?
4 components, from 4 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Placa Down Converter - Breakout (traduccion al espanol) design files?
From the JJaroll/MacBerry-Pi repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Placa Down Converter - Breakout (traduccion al espanol) design in my own project?
Yes, under the terms of its LGPL-3.0 license, which JJaroll chose for the repository.
More boards in MacBerry-Pi
Raspberry Pi Hat - iMac G3
65 × 56.5 mm32 parts2LLGPL-3.00
AVR/ArduinoPlaca J20 - Adaptador VGA iMac G3 DV (traduccion al espanol)
82.6 × 52.5 mm16 parts2LLGPL-3.00
AVR/ArduinoJ2o Board
82.6 × 52.5 mm16 parts2LLGPL-3.00
Raspberry Pi Hat Interface - iMac G3 J20
19.7 × 17.8 mm9 parts2LLGPL-3.00
Placa J22 - Adaptador iMac G3 DV (traduccion al espanol)
65 × 30 mm8 parts2LLGPL-3.00
Imac g3 slot loading J22 adapter board
65 × 30 mm8 parts2LLGPL-3.00
PCB imac unificado MASTER v5 (con corte para la Raspberry)
251.9 × 267 mm7 parts2LLGPL-3.00
Breakout board for the iMac G3 donw converter board
88 × 39 mm4 parts2LLGPL-3.00
Similar boards
134pin 7-967288-1
rusefi
139.7 × 73.7 mm38 parts2LGPL-3.01.2k
Breakout 112pin Connector
174 × 58 mm39 parts2LGPL-3.01.2k
Eecv breakout
140.8 × 53.7 mm9 parts4LGPL-3.01.2k
Breakout 60pin EEC-IV
139.7 × 62.2 mm15 parts2LGPL-3.01.2k
88 Pin Vag Breakout
142 × 58 mm91 parts2LGPL-3.01.2k
Expansion Card Retrofit
FrameworkComputer
24 × 27.3 mm5 parts2LCC-BY-4.01.1k