HardLabs

Placa J22 - Adaptador iMac G3 DV (traduccion al espanol)

JJaroll·MacBerry-Pi·hardware/placas_individuales/J22_frontal_audio/imac_g3_slot_loading_J22_adapter_board_es.kicad_pcb

Placa J22 - Adaptador iMac G3 DV (traduccion al espanol) PCB layout, top view — open source board by JJaroll

About the Placa J22 - Adaptador iMac G3 DV (traduccion al espanol) PCB

Placa J22 - Adaptador iMac G3 DV (traduccion al espanol) is an open source PCB design by JJaroll, published on GitHub under the LGPL-3.0 license. It is a 2-layer board measuring 65 × 30 mm, with 8 components from 7 distinct parts.

By type, the board carries 4 connectors, 3 resistors and 1 capacitor.

It belongs with the dev boards & breakouts and retro computing designs in this gallery.

From the project

Mod del iMac G3 slot-loading (M5521) con Raspberry Pi 5: PCB maestra unificada, placas individuales (J20, J22, Down Converter), bezel interior y visores 3D. Todo en español.

Convierte un iMac G3 DV (slot loading) en un equipo moderno: una Raspberry Pi 5 dentro de la carcasa que usa el tubo CRT original como monitor VGA, con sus altavoces y su botón de encendido. Reversible: no hay que cortar nada del iMac.

Este repositorio reúne la documentación en español, las tres placas del proyecto original traducidas, un PCB master unificado que reemplaza el cableado entre ellas, y visores 3D (HTML autónomo y STL) para revisarlo todo sin instalar nada.

Placa J22 - Adaptador iMac G3 DV (traduccion al espanol) bill of materials (BOM)

8 components, 7 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
Conn_02x13_Odd_Even
J1
1
Screw_Terminal_01x10
J2
1
AudioJack3
J3
1
Conn_02x03_Odd_Even
J4
1
1uF
C1
2
220
R1, R2
1
2.2k
R3

Placa J22 - Adaptador iMac G3 DV (traduccion al espanol) design files

The KiCad project lives in the JJaroll/MacBerry-Pi repository on GitHub; these links point at the commit this page was built from.

Placa J22 - Adaptador iMac G3 DV (traduccion al espanol): common questions

How big is the Placa J22 - Adaptador iMac G3 DV (traduccion al espanol) PCB?

The Placa J22 - Adaptador iMac G3 DV (traduccion al espanol) measures 65 × 30 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Placa J22 - Adaptador iMac G3 DV (traduccion al espanol)?

8 components, from 7 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Placa J22 - Adaptador iMac G3 DV (traduccion al espanol) design files?

From the JJaroll/MacBerry-Pi repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.

Can I use the Placa J22 - Adaptador iMac G3 DV (traduccion al espanol) design in my own project?

Yes, under the terms of its LGPL-3.0 license, which JJaroll chose for the repository.

More boards in MacBerry-Pi

Similar boards