HardLabs

Prototipo-Control-Calidad-Agua

JoanAlejandro·Prototipo-Control-Calidad-Agua·Esquema y PCB/PCB Andres Ortiz.kicad_pcb

Prototipo-Control-Calidad-Agua PCB layout, top view — open source ESP32 board by JoanAlejandro

About the Prototipo-Control-Calidad-Agua PCB

Prototipo-Control-Calidad-Agua is an open source ESP32 PCB design by JoanAlejandro, published on GitHub under the MIT license. It is a 2-layer board measuring 100 × 100 mm, with 12 components from 11 distinct parts.

Its main chip is the ESP32-DEVKIT-V1, from the ESP32 family. Other key parts include the L293D and L7805. By type, the board carries 5 connectors, 4 capacitors and 3 ICs.

From the project

Prototipo capaz de medir determinados parámetros de la potabilidad de una muestra de agua para el consumo.

Main components on the Prototipo-Control-Calidad-Agua

ESP32-DEVKIT-V1L293DL7805

Prototipo-Control-Calidad-Agua bill of materials (BOM)

12 components, 11 distinct parts.

QtyPartRefs
1
ESP32-DEVKIT-V1
U1
1
L293D
U2
1
L7805
U3
1
TCS3200 Colorimetria
J2
1
Motores
J3
1
Pantalla OLED
J4
1
Jack 9V
J5
1
LGZD Turbiedad
J6
1
Condensador
C1
1
Condensador 2
C2
2
10u
C3, C4

Prototipo-Control-Calidad-Agua design files

The KiCad project lives in the JoanAlejandro/Prototipo-Control-Calidad-Agua repository on GitHub; these links point at the commit this page was built from.

Prototipo-Control-Calidad-Agua: common questions

What microcontroller does the Prototipo-Control-Calidad-Agua use?

The Prototipo-Control-Calidad-Agua is built around the ESP32-DEVKIT-V1, from the ESP32 family.

How big is the Prototipo-Control-Calidad-Agua PCB?

The Prototipo-Control-Calidad-Agua measures 100 × 100 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Prototipo-Control-Calidad-Agua?

12 components, from 11 distinct parts. The full bill of materials is listed on this page.

Where can I download the Prototipo-Control-Calidad-Agua design files?

From the JoanAlejandro/Prototipo-Control-Calidad-Agua repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Prototipo-Control-Calidad-Agua design in my own project?

Yes, under the terms of its MIT license, which JoanAlejandro chose for the repository.

Can I test firmware for the Prototipo-Control-Calidad-Agua without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards