HomeAssitantESP32Node

JoelEB·ESP_Smart_Home·HomeAssitantESP32Node/HomeAssitantESP32Node.kicad_pcb

HomeAssitantESP32Node PCB layout, top view — open source ESP32 board by JoelEB

About the HomeAssitantESP32Node PCB

HomeAssitantESP32Node is an open source ESP32 PCB design by JoelEB, published on GitHub. It is a 2-layer board measuring 207.4 × 111.6 mm, with 32 components from 23 distinct parts.

Its main chip is the ESP32-WROOM-32UE, from the ESP32 family. Other key parts include the AP2112K-3.3, XC6220B331MR, SCD41, R-78E5.0-0.5 and PCA9615. By type, the board carries 9 capacitors, 8 resistors, 6 ICs, 5 connectors, 2 switches and 2 diodes.

It belongs with the iot & wireless designs in this gallery.

Main components on the HomeAssitantESP32Node

HomeAssitantESP32Node bill of materials (BOM)

32 components, 23 distinct parts.

QtyPartRefs
1
ESP32-WROOM-32UE
U1
1
AP2112K-3.3
U2
1
XC6220B331MR
U3
1
SCD41
U4
1
R-78E5.0-0.5
U6
1
PCA9615
U7
1
Qwiic_RA
J1
1
Conn_01x06
J2
1
USB_B_Micro
J3
1
Barrel_Jack_Switch
J5
1
RJ45
J8
2
SMD_5.2x5.2mm_h2.5mm
SW1, SW2
1
DIODE
D1
1
LED
D2
2
1uF
C1, C2
2
10uF
C3, C4
2
10UF
C5, C6
2
0.1uF
C7, C8
1
4.7uF
C9
1
10K
R1
Show 3 more
QtyPartRefs
1
330
R3
4
390
R7, R9, R10, R12
2
100
R8, R11

HomeAssitantESP32Node design files

The KiCad project lives in the JoelEB/ESP_Smart_Home repository on GitHub; these links point at the commit this page was built from.

HomeAssitantESP32Node: common questions

What microcontroller does the HomeAssitantESP32Node use?

The HomeAssitantESP32Node is built around the ESP32-WROOM-32UE, from the ESP32 family.

How big is the HomeAssitantESP32Node PCB?

The HomeAssitantESP32Node measures 207.4 × 111.6 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the HomeAssitantESP32Node?

32 components, from 23 distinct parts. The full bill of materials is listed on this page.

Where can I download the HomeAssitantESP32Node design files?

From the JoelEB/ESP_Smart_Home repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the HomeAssitantESP32Node design in my own project?

The repository has no license, so all rights stay with JoelEB. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the HomeAssitantESP32Node without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

More boards in ESP_Smart_Home

Similar boards