21 open source boards using the ESP32-WROOM-32UE

Real designs built with the ESP32-WROOM-32UE, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

21 boardsClear filters|Most starred

How designs wire the ESP32-WROOM-32UE

Read from the KiCad layouts of 17 open source designs, one per repository: what each pin of the ESP32-WROOM-32UE connects to, and the resistors, capacitors and other passives placed on it.

  • The EN pin has a pull-up to 3.3V on 13 of 17 designs, most often 10 kΩ (then 500 kΩ).
  • The VDD pin has a decoupling capacitor on 12 of 17 designs, most often 100 nF (then 10 µF).
  • The EN pin has a capacitor to GND on 11 of 17 designs, most often 100 nF (then 1 µF).
  • The SENSOR_VN pin is left unconnected on 11 of 17 designs (a signal on 6).
GNDpin 1, 15, 38, 39Connected to: GND 90%
VDDpin 2Connected to: 3.3V 76% · a signal 24%
  • Decoupling capacitor on 71% · 100 nF (12), 10 µF (5), 1 µF (2)
ENpin 3Connected to: A connector 65%
  • Pull-up to 3.3V on 76% · 10 kΩ (12), 500 kΩ (1)
  • Capacitor to GND on 65% · 100 nF (6), 1 µF (6), 10 µF (2)
SENSOR_VNpin 5Connected to: Not connected 65% · a signal 35%
NCpin 17, 18, 19, 20, 21, 22, 32Connected to: Not connected 95%
IO0pin 25Connected to: A connector 41%
  • Pull-up to 3.3V on 47% · 10 kΩ (8)

24 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Pixle LED by hackclub, ESP32 Lora by WannaBAcoder, Constellation Stack V3.0 by HelloItzAlex and Customer-Microcontroller-PCB-Board by Jonathan00022.

The ESP32-WROOM-32UE in open source designs

The gallery holds 21 open source boards using the ESP32-WROOM-32UE from 17 GitHub repositories; a typical one measures about 84.3 × 69.6 mm and carries around 67 components.

62% are two-layer designs, the rest use four layers or more, and 38% carry an open source license.

The most starred is Pixle LED by hackclub.

Microcontrollers on boards using the ESP32-WROOM-32UE

ESP32-WROOM-32UE: common questions

Where can I find a ESP32-WROOM-32UE reference design?

Each of the 21 boards on this page is a real design using the ESP32-WROOM-32UE. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What pull-up resistor is used on the ESP32-WROOM-32UE EN pin?

The EN pin has a pull-up to 3.3V on 13 of 17 designs, most often 10 kΩ (then 500 kΩ). Counted from the KiCad layouts of 17 open source designs using the ESP32-WROOM-32UE.

What decoupling capacitors do designs use on the ESP32-WROOM-32UE VDD pin?

The VDD pin has a decoupling capacitor on 12 of 17 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 17 open source designs using the ESP32-WROOM-32UE.

How is the ESP32-WROOM-32UE SENSOR_VN pin connected?

The SENSOR_VN pin is left unconnected on 11 of 17 designs (a signal on 6). Counted from the KiCad layouts of 17 open source designs using the ESP32-WROOM-32UE.

What parts are used alongside the ESP32-WROOM-32UE?

The AMS1117-3.3, AP2112K-3.3, CH340C, CH340K and DW01A appear in the most repositories here.

Which microcontrollers do boards using the ESP32-WROOM-32UE use?

Most are built on ESP32 (21).

How big is a typical board using the ESP32-WROOM-32UE?

The median is 84.3 × 69.6 mm, and 62% are two-layer designs.

What is the most popular open source board using the ESP32-WROOM-32UE?

By GitHub stars, Pixle LED by hackclub, with 7 stars.

Can I simulate one of these boards using the ESP32-WROOM-32UE before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part