SunSproutSatellite
JohnNeville·SunSprout·hardware/satellite/SunSproutSatellite.kicad_pcb
About the SunSproutSatellite PCB
SunSproutSatellite is an open source PCB design by JohnNeville, published on GitHub under the CERN-OHL-S-2.0 license. It is a 4-layer board measuring 27.3 × 51.1 mm, with 28 components from 14 distinct parts.
Other key parts include the PCA9615DPZ, ADS1115IDGS, DS2482S-100+ and USBLC6-4SC6. By type, the board carries 10 resistors, 7 connectors, 6 capacitors, 4 ICs and 1 LED.
It belongs with the power & battery and sensors designs in this gallery.
From the project
An esp32-c5 powered board that adds dual source battery charging, fuel management, and differential i2c bus. This was largely developed to be a complement with my other soil sensor project.
The satellite board's KiCad 10 project. Open SunSproutSatellite.kicadpro`.
This board is a differential-I2C endpoint: it terminates the far end of the cable coming from a SunSproutHub, converts the differential pair back to standard I2C, and reads four capacitive soil-moisture probes plus one 1-Wire soil-temperature probe. For the design reasoning behind each part, see docs/satellite/modules/.
Main components on the SunSproutSatellite
SunSproutSatellite bill of materials (BOM)
28 components, 14 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | PCA9615DPZ | TSSOP10_SOT552-1_NXP-L | U1 |
| 1 | ADS1115IDGS | TSSOP-10_3x3mm_P0.5mm | U2 |
| 1 | DS2482S-100+ | SOIC-8_3.9x4.9mm_P1.27mm | U3 |
| 1 | USBLC6-4SC6 | SOT-23-6 | U4 |
| 1 | RJHSE5380_QwiicBusCompatible | AMPHENOL_RJHSE5380 | J1 |
| 5 | Conn_01x03 | JST_PH_B3B-PH-K_1x03_P2.00mm_Vertical | J2, J3, J4, J5, J6 |
| 1 | BM04B-SRSS-TB(LF)(SN) Qwiic JST | JST_SH_BM04B-SRSS-TB_1x04-1MP_P1.00mm_Vertical | J8 |
| 1 | PWR | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | LED1 |
| 1 | 22uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1 |
| 5 | 100nF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2, C3, C4, C5, C6 |
| 3 | 4.7k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2, R9 |
| 4 | 390 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3, R5, R6, R8 |
| 2 | 100 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R4, R7 |
| 1 | 120Ω | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R10 |
SunSproutSatellite design files
The KiCad project lives in the JohnNeville/SunSprout repository on GitHub; these links point at the commit this page was built from.
SunSproutSatellite: common questions
How big is the SunSproutSatellite PCB?
The SunSproutSatellite measures 27.3 × 51.1 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the SunSproutSatellite?
28 components, from 14 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the SunSproutSatellite design files?
From the JohnNeville/SunSprout repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the SunSproutSatellite design in my own project?
Yes, under the terms of its CERN-OHL-S-2.0 license, which JohnNeville chose for the repository.
More boards in SunSprout
Similar boards
Sensor smd
scottbez1
40 × 20 mm5 parts2LApache-2.04.2kSensors
StuckAtPrototype
15.2 × 9 mm14 parts4LApache-2.03.8kEinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kMicrophone
Mentra-Community
5.5 × 6.1 mm6 parts2LMIT1.2k