Dreimaskin-ELS
jonasnic·Dreimaskin-ELS·HW/ELS_PCB/ELS_project.kicad_pcb
About the Dreimaskin-ELS PCB
Dreimaskin-ELS is an open source ESP32 PCB design by jonasnic, published on GitHub. It is a 4-layer board measuring 95.6 × 86.1 mm, with 71 components from 35 distinct parts.
Its main chip is the ESP32-DEVKIT-V1_30pin, from the ESP32 family. Other key parts include the INA180A1, SP3485EN-L/TR, MX250-3.5-03P-B-GY01-Cu-A and LMR51420XDDCR. By type, the board carries 35 resistors, 17 capacitors, 6 connectors, 5 ICs, 4 transistors and 3 diodes.
From the project
this will contain everything in the Electronic lead screw project
Main components on the Dreimaskin-ELS
Dreimaskin-ELS bill of materials (BOM)
71 components, 35 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ~ | ESP32-DEVKIT-V1_30pin | U1 |
| 1 | INA180A1 | SOT-23-5 | U2 |
| 1 | SP3485EN-L/TR MaxLinear(迈凌) | SOIC-8_L5.0-W4.0-P1.27-LS6.0-BL | U5 |
| 1 | MX250-3.5-03P-B-GY01-Cu-A MX250-3.5-03P-B-GY01-CU-A MAX(迈旭) | CONN-TH_3P-P3.50_MX250-3.5-03P-B-GY01-CU-A | U6 |
| 1 | LMR51420XDDCR TI(德州仪器) | SOT-23-6_L2.9-W1.6-P0.95-LS2.8-BL | U7 |
| 4 | 2N7002 | SOT-23 | Q1, Q2, Q3, Q4 |
| 2 | MX205V-5.0-03P-GN01-Cu-A MX205V-5.0-03P-GN01-CU-A MAX(迈旭) | CONN-TH_3P-P5.00_MX205V-5.0-03P-GN01-CU-A | CN1, CN4 |
| 1 | MX250-3.5-08P-B-GY01-Cu-A MX250-3.5-08P-B-GY01-CU-A MAX(迈旭) | CONN-TH_8P-P3.50-LS5.10_MX250-3.5-08P-B-GY01-CU-A | CN2 |
| 1 | MX250-3.5-06P-B-GY01-Cu-A MX250-3.5-06P-B-GY01-CU-A MAX(迈旭) | CONN-TH_6P-P3.50_MX250-3.5-06P-B-GY01-CU-A | CN3 |
| 2 | CONN_01X02_PIN Conn_01x02_Pin | JST_XH_B2B-XH-AM_1x02_P2.50mm_Vertical | J4, J5 |
| 3 | SMF05CT1G onsemi(安森美) | SOT-363_L2.0-W1.3-P0.65-LS2.1-BR | D1, D2, D3 |
| 1 | SRR1208-120ML | L_Bourns_SRR1208_12.7x12.7mm | L3 |
| 1 | 1NF 1nF | C_0402_1005Metric | C1 |
| 2 | 1UF 1uF | C_0402_1005Metric | C2, C11 |
| 5 | 100NF 100nF | C_0402_1005Metric | C3, C4, C5, C6, C7 |
| 1 | EEHZK1V181P 1uF | C_0402_1005Metric | C8 |
| 1 | 0805B391K101NT 1uF | C_0402_1005Metric | C9 |
| 1 | 100NF 1uF | C_0402_1005Metric | C10 |
| 1 | 100NF GRM155R71C104KA88D | C_0402_1005Metric | C12 |
| 1 | GRM32ER61C476KE15L | C_1210_3225Metric | C13 |
Show 15 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | GRM32ER61C476KE15L MSASU168SB5105MTNA01 | C_0603_1608Metric | C15 |
| 2 | MSASU168SB5105MTNA01 | C_0603_1608Metric | C16, C17 |
| 1 | GRM188R72A104KA35D | C_0603_1608Metric | C18 |
| 4 | 100K 100k | R_0603_1608Metric | R1, R4, R5, R9 |
| 7 | 1kΩ | R_0603_1608Metric | R2, R3, R6, R7, R18, R32, R33 |
| 1 | 100K 10k | R_0603_1608Metric | R8 |
| 4 | 1.8K 1.8k | R_0603_1608Metric | R10, R12, R14, R29 |
| 4 | 3.3K 3.3k | R_0603_1608Metric | R11, R13, R15, R30 |
| 1 | 1M | R_0603_1608Metric | R16 |
| 1 | 10mΩ | R_2512_6332Metric | R17 |
| 7 | 33Ω | R_0603_1608Metric | R19, R20, R24, R25, R26, R27, R28 |
| 3 | 100Ω | R_0603_1608Metric | R21, R22, R23 |
| 1 | 100Ω | R_0402_1005Metric | R31 |
| 1 | 22.1 kΩ | R_0402_1005Metric | R34 |
| 1 | 174 kΩ | R_0402_1005Metric | R35 |
Dreimaskin-ELS design files
The KiCad project lives in the jonasnic/Dreimaskin-ELS repository on GitHub; these links point at the commit this page was built from.
Dreimaskin-ELS: common questions
What microcontroller does the Dreimaskin-ELS use?
The Dreimaskin-ELS is built around the ESP32-DEVKIT-V1_30pin, from the ESP32 family.
How big is the Dreimaskin-ELS PCB?
The Dreimaskin-ELS measures 95.6 × 86.1 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Dreimaskin-ELS?
71 components, from 35 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Dreimaskin-ELS design files?
From the jonasnic/Dreimaskin-ELS repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Dreimaskin-ELS design in my own project?
The repository has no license, so all rights stay with jonasnic. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Dreimaskin-ELS without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k