HardLabs

Wio-SX1262 for XIAO nRF52840

Josephrp·meshtonic·pcb/libs/Seeed Studio Wio SX1262 for XIAO nRF52840 v1.3/Wio-SX1262 for XIAO nRF52840.kicad_pcb

Wio-SX1262 for XIAO nRF52840 PCB layout, top view — open source board by Josephrp

About the Wio-SX1262 for XIAO nRF52840 PCB

Wio-SX1262 for XIAO nRF52840 is an open source PCB design by Josephrp, published on GitHub under the Custom license license. It is a 2-layer board measuring 17.8 × 21.4 mm, with 11 components from 6 distinct parts.

Other key parts include the Wio-SX1262. By type, the board carries 6 resistors, 2 connectors, 1 IC, 1 relay and 1 capacitor.

It belongs with the rf & radio, power & battery and sensors designs in this gallery.

From the project

Meshtonic H4M Companion — ESP32-S3 carrier for PortaPack H4M / Mayhem with multi-slot LoRa and standalone Meshtastic

Meshtonic H4M Companion v2 is a custom carrier board and firmware stack for a Seeed XIAO ESP32-S3 Plus that docks to a HackRF + PortaPack H4M (Mayhem) and can also run as a standalone Meshtastic mesh node.

Repository: github.com/Josephrp/meshtonic (formerly Meteor-On-Mesh)

The two ESP32 firmwares are mutually exclusive — flash one or the other depending on whether you are using the board docked or as a mesh node.

Wio-SX1262 for XIAO nRF52840, from the project README
From the project README

Main components on the Wio-SX1262 for XIAO nRF52840

Wio-SX1262

Wio-SX1262 for XIAO nRF52840 bill of materials (BOM)

11 components, 6 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
Wio-SX1262
SenseCAP
U1
2
Header 1x7 2.54mm
J1, J2
1
TS-1188E 6C81
百斯特
K1
1
CC0402KRX7R7BB104
100nF
YAGEO
C1
2
RC0402JR-0710KL
10K
YAGEO
R1, R2
4
RC0402FR-0722RL
22R
YAGEO
R3, R4, R5, R6

Wio-SX1262 for XIAO nRF52840 design files

The KiCad project lives in the Josephrp/meshtonic repository on GitHub; these links point at the commit this page was built from.

Wio-SX1262 for XIAO nRF52840: common questions

How big is the Wio-SX1262 for XIAO nRF52840 PCB?

The Wio-SX1262 for XIAO nRF52840 measures 17.8 × 21.4 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Wio-SX1262 for XIAO nRF52840?

11 components, from 6 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Wio-SX1262 for XIAO nRF52840 design files?

From the Josephrp/meshtonic repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Wio-SX1262 for XIAO nRF52840 design in my own project?

It is published under Custom license, which limits how it may be reused; read the license before building on it.

More boards in meshtonic

Similar boards