PortaPack H1
About the PortaPack H1 PCB
PortaPack H1 is an open source PCB design by Josephrp, published on GitHub under the Custom license license. It is a board measuring 120 × 75 mm, with 108 components from 53 distinct parts.
Other key parts include the AK4951EN, TCR2EF18,LM(CT, 5M40ZE64, CAT4004[_AB] and NUF4220MN. By type, the board carries 41 capacitors, 26 resistors, 9 connectors, 9 test points, 8 ICs and 4 inductors.
It belongs with the rf & radio and power & battery designs in this gallery.
From the project
Meshtonic H4M Companion — ESP32-S3 carrier for PortaPack H4M / Mayhem with multi-slot LoRa and standalone Meshtastic
PortaPack H1 is portability add-on hardware for the HackRF One software-defined radio (SDR).
The schematic was drawn using KiCad 4.0.6.
Schematic symbols are cached in the design files, but are also available in a separate repository:
https://github.com/sharebrained/library-kicad/
The circuit board was designed using KiCad.
PCB footprints are cached in the design files, but are also avaliable in a separate repository:
Main components on the PortaPack H1
PortaPack H1 bill of materials (BOM)
108 components, 53 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | AK4951EN | IPC_QFN33P40_400X400X80L35X20T280N | U1 |
| 1 | TCR2EF18,LM(CT | IPC_SOT23-5P95_275X135L40X40N | U2 |
| 1 | 5M40ZE64 | IPC_QFP65P40_900X900X120L60X18T450N | U3 |
| 1 | CAT4004[_AB] | IPC_SON9P50_200X200X55L32X24T90X160N | U4 |
| 1 | NUF4220MN | IPC_SON9P50_200X200X100L30X25T80X120N | U5 |
| 1 | BQ24075RGT | IPC_QFN17P50_300X300X100L40X25T160N | U6 |
| 1 | 74HC1G04GW | IPC_SOT23-5P65_212X110L33X22N | U7 |
| 1 | MAX-M8 | MAX-M8 | U8 |
| 1 | 10.00000M | IPC_OSCCC320X250X110L75X100N | X1 |
| 1 | HEADER_1X3 | JST_S3B-PH-SM4-TB | J1 |
| 1 | MICROSD_DETSW | ALPS_SCHA4B0419 | J2 |
| 1 | ER-TFT024-3_FPC | ER-CON50HT-1 | J3 |
| 1 | HEADER_1X2 | JST_S2B-PH-SM4-TB | J4 |
| 1 | CONN_COAX | 1909763-1 | P1 |
| 1 | TRRS_SW_JACK | CUI_SJ-43516-SMT | P2 |
| 1 | HACKRF_ONE_P20 | HEADER_11X2_REV_SM_254_AP | P20 |
| 1 | HACKRF_ONE_P22 | HEADER_13X2_REV_SM_254_AP | P22 |
| 1 | HACKRF_ONE_P28 | HEADER_11X2_REV_SM_254_AP | P28 |
| 1 | BATTERY | MPD_BU2032SM-BT-G | BT1 |
| 4 | HOLE1 | HOLE_3200UM_VIAS | H2, H3, H4, H5 |
Show 33 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ER-TFT024-3_PANEL | ER-TFT024-3 | LCD1 |
| 1 | 220R | IPC_RESCAXS8P80_320X160X60L30X45N | RP1 |
| 1 | CK_TSWB-3N-CB | CK_TSWB-3N-CB222_LFS | SW1 |
| 9 | TP | TP_1MM | TP1, TP2, TP3, TP4, TP5, TP6, TP7, TP8 +1 |
| 1 | LED 0603 green | IPC_LEDC1608X90L40N | D1 |
| 1 | LED 0603 yellow | IPC_LEDC1608X90L40N | D2 |
| 3 | FBEAD | IPC_BEADC160X80X95L40N | FB1, FB2, FB3 |
| 1 | 27N | IPC_INDC100X50X60L20N | L1 |
| 1 | 1U | IPC_CAPC200X125X135L45N | C1 |
| 14 | 100N | IPC_CAPC100X50X55L25N | C2, C3, C4, C5, C9, C18, C20, C27 +6 |
| 4 | 2U2 | IPC_CAPC160X80X90L35N | C6, C8, C10, C12 |
| 13 | 10U | IPC_CAPC200X125X135L45N | C7, C11, C13, C26, C32, C34, C36, C37 +5 |
| 2 | 1U | IPC_CAPC160X80X90L35N | C14, C25 |
| 2 | 4U7 | IPC_CAPC200X125X135L45N | C15, C16 |
| 1 | 1N | IPC_CAPC100X50X55L25N | C17 |
| 1 | 10N | IPC_CAPC100X50X55L25N | C19 |
| 2 | 220N | IPC_CAPC160X80X90L35N | C22, C23 |
| 1 | R | IPC_CAPC160X80X90L35N | C39 |
| 1 | R | IPC_RESC100X50X40L25N | R1 |
| 1 | 10K | IPC_RESC160X80X55L25N | R2 |
| 2 | 1K5 | IPC_RESC100X50X40L25N | R3, R5 |
| 1 | 1K91 | IPC_RESC100X50X40L25N | R4 |
| 1 | 1K8 | IPC_RESC100X50X40L25N | R6 |
| 3 | 0R | IPC_RESC100X50X40L25N | R7, R23, R24 |
| 8 | 10K | IPC_RESC100X50X40L25N | R8, R9, R10, R13, R14, R15, R16, R19 |
| 2 | 33R | IPC_RESC160X80X55L25N | R11, R12 |
| 1 | 1M | IPC_RESC100X50X40L25N | R17 |
| 1 | 2K2 | IPC_RESC160X80X55L25N | R18 |
| 1 | 3K9 | IPC_RESC100X50X40L25N | R20 |
| 1 | 100R | IPC_RESC100X50X40L25N | R21 |
| 1 | 33R | IPC_RESC100X50X40L25N | R22 |
| 1 | 100K | IPC_RESC100X50X40L25N | R25 |
| 1 | 10R | IPC_RESC100X50X40L25N | R26 |
PortaPack H1 design files
The KiCad project lives in the Josephrp/meshtonic repository on GitHub; these links point at the commit this page was built from.
PortaPack H1: common questions
How big is the PortaPack H1 PCB?
The PortaPack H1 measures 120 × 75 mm and is 1.6 mm thick.
How many components are on the PortaPack H1?
108 components, from 53 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the PortaPack H1 design files?
From the Josephrp/meshtonic repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the PortaPack H1 design in my own project?
It is published under Custom license, which limits how it may be reused; read the license before building on it.
More boards in meshtonic
NXPMarzipan
120 × 75 mm416 partsCustom license12
NXP${TITLE}
120 × 75 mm340 parts4LCustom license12
Neapolitan
120 × 75 mm290 partsCustom license12
ESP32Meshtonic h4m v2
71.1 × 168.4 mm115 parts6LCustom license12
Grove - Vision AI Module V2
40 × 20 mm112 parts4LCustom license12
Nordic nRFSeeed Studio XIAO nRF52840 v1.3
21 × 17.8 mm79 parts2LCustom license12
ESP32ESP32S3
17.8 × 21.1 mm71 parts2LCustom license12
ESP32XIAO ESP32S3 Plus V1.1 250724
17.8 × 21.1 mm70 parts6LCustom license12
Wio LR1121 Module v0.9
17 × 12 mm69 parts4LCustom license12
ESP32XIAO
203.1 × 125.1 mm21 parts2LCustom license12
Wio-SX1262 for XIAO nRF52840
17.8 × 21.4 mm11 parts2LCustom license12
Similar boards
Stack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7k
Display Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7k
ControllerCurrentShuntAddOn
stuartpittaway
26 × 16.9 mm9 parts2LCC-BY-NC-4.01.1k
Module 16S PassiveBalanceAddOn
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k
TemperaturePCB PANEL
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1k
ProgrammingAdapter
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1k