7 DOF Arm
JoshChomps·7_DOF_Arm·hardware/board_b/deskarm_board_b.kicad_sch
About the 7 DOF Arm PCB
7 DOF Arm is an open source ESP32 PCB design by JoshChomps, published on GitHub. It is a board, with 52 components from 36 distinct parts.
Its main chip is the ESP32-S3-WROOM-1-N8, from the ESP32 family. Other key parts include the USBLC6-2SC6, SN65HVD230 and AP2112K-3.3. By type, the board carries 16 resistors, 10 connectors, 8 capacitors, 7 test points, 4 ICs and 4 diodes.
It belongs with the power & battery designs in this gallery.
From the project
A mostly 3D-printed 7-axis desk arm with swappable end effectors, designed in Fusion by script.
Schematics only, A and B drawn on 14 Oct 2026 and C on 15 Oct with Kairo (Josh's KiCad schematic MCP, \Kairo, M1.9). Nothing here is laid out, ordered, built or powered. Layout and routing are Josh's, in KiCad, with board outlines from the Fusion base-board layout. The plan behind the boards is docs/10 §3-4 and docs/04.
Kairo's working copies stay in D:\KiCad\projects\deskarm\ (its only allowed root). These repo copies are the master from now on: edit here in KiCad. Kairo can still read and ERC-check them if they are copied back under D:\KiCad, or if \7DOFArm\hardware is added to Kairo's…
Main components on the 7 DOF Arm
7 DOF Arm bill of materials (BOM)
52 components, 36 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-S3-WROOM-1-N8 | ESP32-S3-WROOM-1 | U1 |
| 1 | USBLC6-2SC6 | SOT-23-6 | U2 |
| 1 | SN65HVD230 | SOIC-8_3.9x4.9mm_P1.27mm | U3 |
| 1 | AP2112K-3.3 | SOT-23-5 | U4 |
| 1 | USB-C (native USB, CDC) | USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J1 |
| 1 | CAN A: H L GND | JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | J2 |
| 1 | CAN B: H L GND | JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | J3 |
| 1 | E-STOP AUX NC (to GND) | JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J4 |
| 1 | HALL 1: 5V GND OUT | JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | J5 |
| 1 | HALL 2: 5V GND OUT | JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | J6 |
| 1 | MT6701 SSI: 3V3 GND CSN CLK DO | JST_XH_B5B-XH-A_1x05_P2.50mm_Vertical | J7 |
| 1 | TO BOARD A | JST_XH_B8B-XH-A_1x08_P2.50mm_Vertical | J8 |
| 1 | UART0: TX RX GND | PinHeader_1x03_P2.54mm_Vertical | J9 |
| 1 | SPARE GPIO | PinHeader_1x14_P2.54mm_Vertical | J10 |
| 1 | CAN TERM (fit = bus end) | PinHeader_1x02_P2.54mm_Vertical | JP1 |
| 1 | RESET | SW_Push_1P1T_XKB_TS-1187A | SW1 |
| 1 | BOOT | SW_Push_1P1T_XKB_TS-1187A | SW2 |
| 1 | CANH | TestPoint_Pad_D1.5mm | TP1 |
| 1 | CANL | TestPoint_Pad_D1.5mm | TP2 |
| 1 | CAN_TX | TestPoint_Pad_D1.5mm | TP3 |
Show 16 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | CAN_RX | TestPoint_Pad_D1.5mm | TP4 |
| 1 | +3V3 | TestPoint_Pad_D1.5mm | TP5 |
| 1 | +5VD | TestPoint_Pad_D1.5mm | TP6 |
| 1 | GND | TestPoint_Pad_D1.5mm | TP7 |
| 1 | WS2812B-2020 status | LED_WS2812B-2020_PLCC4_2.0x2.0mm | D1 |
| 2 | SS14 | D_SMA | D2, D3 |
| 1 | 3V3 green | LED_0603_1608Metric | D4 |
| 3 | 10uF | C_0805_2012Metric | C1, C4, C5 |
| 4 | 100nF | C_0603_1608Metric | C2, C6, C7, C8 |
| 1 | 1uF | C_0603_1608Metric | C3 |
| 8 | 10k | R_0603_1608Metric | R1, R2, R7, R9, R10, R11, R12, R15 |
| 2 | 5.1k | R_0603_1608Metric | R3, R4 |
| 1 | 0R (Rs: 10k-100k = slope control) | R_0603_1608Metric | R5 |
| 1 | 120 | R_1206_3216Metric | R6 |
| 2 | 1k | R_0603_1608Metric | R8, R16 |
| 2 | 4.7k | R_0603_1608Metric | R13, R14 |
7 DOF Arm design files
The KiCad project lives in the JoshChomps/7_DOF_Arm repository on GitHub; these links point at the commit this page was built from.
7 DOF Arm: common questions
What microcontroller does the 7 DOF Arm use?
The 7 DOF Arm is built around the ESP32-S3-WROOM-1-N8, from the ESP32 family.
How many components are on the 7 DOF Arm?
52 components, from 36 distinct parts. The full bill of materials is listed on this page.
Where can I download the 7 DOF Arm design files?
From the JoshChomps/7_DOF_Arm repository on GitHub, which has the schematic; the links under Design files point to each one.
Can I use the 7 DOF Arm design in my own project?
The repository has no license, so all rights stay with JoshChomps. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the 7 DOF Arm without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8k