Flighttt-Controller

juanfierro4892·Flighttt-Controller·Hardware/FlightController.kicad_pcb

Flighttt-Controller PCB layout, top view — open source STM32 board by juanfierro4892

About the Flighttt-Controller PCB

Flighttt-Controller is an open source STM32 PCB design by juanfierro4892, published on GitHub. It is a 2-layer board measuring 52.5 × 58.1 mm, with 79 components from 38 distinct parts.

Its main chip is the STM32F722RETX, from the STM32 family. Other key parts include the BQ25883RGER, ICM-45686, BMP580, TPS63070RNMR and LMR51430. By type, the board carries 37 capacitors, 22 resistors, 6 ICs, 4 inductors, 3 connectors and 2 crystals.

It belongs with the robotics & motion, power & battery and sensors designs in this gallery.

From the project

A tiny PCB to control differents devices that could fly

This is a custom flight controller designed for control rockets. It uses an STM32F722 microcontroller, ICM-45686 IMU, BMP580 barometer, and has a microSD card for logging flight data. It supports 2S LiPo batteries with onboard charging and has PWM outputs for controlling servos.

The board was designed in KiCad and is fully open source.

There is no assembly instructions because as it have a lot of components there come assembled from the manufacturer aka JLCPCB

Flighttt-Controller, from the project README
From the project README

Main components on the Flighttt-Controller

Flighttt-Controller bill of materials (BOM)

79 components, 38 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
BQ25883RGER
U1
1
ICM-45686
U2
1
STM32F722RETX
STM32F722RETx
U3
1
BMP580
U4
1
TPS63070RNMR
U5
1
LMR51430
U6
1
X322525MOB4SI
X1
1
Q13FC1350000400
X2
1
SCREW_TERMINAL_01X02
Screw_Terminal_01x02
J1
2
CONN_01X03
Conn_01x03
J2, J3
1
TF-01A
Card1
2
TS-1088-AR02016
SW1, SW2
1
TYPE-C 16PIN 2MD(073)
TYPE-C 16PIN 2MD
SHOU HAN(首韩)
USB1
1
LED
D1
1
FCM1608KF-601T03
L4
1
C435392
DFE252012F-1R0M=P2
L5
1
XFL4020-152MEC
L6
1
YHNR3015-5R6M
L7
4
1UF
1uF
C1, C28, C29, C30
3
10UF
10uF
C2, C9, C12
Show 18 more
QtyPartRefs
3
10UF
10uF
C3, C5, C31
1
47NF
47nF
C4
1
44UF
44uF
C6
2
10UF
10uF
C7, C8
3
22UF
22uF
C10, C11, C13
12
100NF
100nF
C14, C15, C19, C20, C21, C22, C23, C24 +4
1
2.2UF
2.2uF
C16
2
22UF
22uF
C17, C18
1
2.2UF
2.2uF
C32
2
20PF
20pF
C33, C34
2
6.8PF
6.8pF
C35, C36
2
5.1K
R1, R2
1
383
R3
1
5.23K
R4
1
30.1K
R5
15
10K
R6, R7, R8, R9, R10, R11, R12, R13 +7
1
100K
R14
1
22.1K
R15

Flighttt-Controller design files

The KiCad project lives in the juanfierro4892/Flighttt-Controller repository on GitHub; these links point at the commit this page was built from.

Flighttt-Controller: common questions

What microcontroller does the Flighttt-Controller use?

The Flighttt-Controller is built around the STM32F722RETX, from the STM32 family.

How big is the Flighttt-Controller PCB?

The Flighttt-Controller measures 52.5 × 58.1 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Flighttt-Controller?

79 components, from 38 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Flighttt-Controller design files?

From the juanfierro4892/Flighttt-Controller repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Flighttt-Controller design in my own project?

The repository has no license, so all rights stay with juanfierro4892. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Flighttt-Controller without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

Similar boards