CM4 highspeed Carrier
JulioxTito·CM4_highspeed_Carrier_PCB·hardware/CM4_Mini_PC.kicad_pcb
About the CM4 highspeed Carrier PCB
CM4 highspeed Carrier is an open source Raspberry Pi PCB design by JulioxTito, published on GitHub. It is a 4-layer board measuring 90 × 60 mm, with 35 components from 29 distinct parts.
Its main chip is the ComputeModule4, from the Raspberry Pi family. Other key parts include the MagJack_GbE, USB2514B-I/M2, AP22653W6, PCF85063AT and AP64501SP-13. By type, the board carries 10 capacitors, 5 ICs, 5 connectors, 5 resistors, 4 diodes and 2 crystals.
It belongs with the dev boards & breakouts and power & battery designs in this gallery.
From the project
Custom 4-layer controlled-impedance carrier board for Raspberry Pi CM4 with PCIe Gen 2.0 M.2 NVMe SSD storage, 5V/3A USB-C power delivery, 4K HDMI, Gigabit Ethernet, and 4-port USB 2.0 hub in a compact 90x60mm form factor. Designed in KiCad 10.
Designed by Julio Tito | GitHub Profile | ECE Hardware Portfolio
A custom, compact (~90 mm × 60 mm) 4-layer controlled-impedance carrier board for the Raspberry Pi Compute Module 4 (CM4). Engineered for high-performance mini-desktop computing, embedded industrial workloads, and edge IoT applications with high-speed PCIe Gen 2.0 M.2 Key-M NVMe SSD storage.
While standard consumer Raspberry Pi boards rely on slow MicroSD cards or shared USB 3.0 bridges, this design directly unlocks the CM4’s native single-lane PCIe Gen 2.0 bus (5.0 Gbps) to achieve true solid-state read/write throughput…
Main components on the CM4 highspeed Carrier
CM4 highspeed Carrier bill of materials (BOM)
35 components, 29 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MagJack_GbE | TRJG0926HENL | U3 |
| 1 | USB2514B-I/M2 | QFN-36-1EP_6x6mm_P0.5mm_EP4.1x4.1mm_ThermalVias | U6 |
| 1 | AP22653W6 | SOT-23-6 | U7 |
| 1 | PCF85063AT | SOIC-8_3.9x4.9mm_P1.27mm | U8 |
| 1 | AP64501SP-13 | SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.95x4.9mm_Mask2.71x3.4mm_ThermalVias | U16 |
| 1 | DMP3013SFV-7 | Diodes_PowerDI3333-8 | Q1 |
| 1 | 24MHz | Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | 32.768kHz | Crystal_SMD_3215-2Pin_3.2x1.5mm | Y2 |
| 1 | USB_C_5V_PWR | USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1 |
| 1 | MicroSD_Socket | SDCARD_MOLEX_503398-1892 | J7 |
| 1 | Full_Size_HDMI0 | EDAC 690-019-298-412 | J10 |
| 1 | M.2_Key-M_NVMe | TE_M.2_M_2x38-1MP_P0.5mm | J12 |
| 1 | Dual_Stacked_USB | MOLEX_USB_67298-4090 | J13 |
| 1 | CR1220 | BatteryHolder_Keystone_3000_1x12mm | BT1 |
| 1 | ComputeModule4 | Raspberry-Pi-4-Compute-Module | Module1 |
| 1 | LED_PWR_RED | LED_0603_1608Metric | D1 |
| 1 | LED_ACT_GRN | LED_0603_1608Metric | D2 |
| 1 | BAT54C | SOT-23 | D3 |
| 1 | LED_NVME_ACT | LED_0603_1608Metric | D5 |
| 1 | SRN6045TA-3R3Y | L_Bourns_SRN6045TA | L5 |
Show 9 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 27pF | C_0402_1005Metric | C8, C9 |
| 1 | 100uF | CP_EIA-7343-31_Kemet-D | C16 |
| 1 | 100nF_PCIE_TX_P | C_0402_1005Metric | C30 |
| 1 | 100nF_PCIE_TX_N | C_0402_1005Metric | C31 |
| 2 | 10uF_5V | C_0805_2012Metric | C34, C35 |
| 3 | 10uF_3.3V | C_0805_2012Metric | C47, C49, C51 |
| 3 | 470R | R_0402_1005Metric | R2, R3, R21 |
| 1 | 20K_1% | R_0402_1005Metric | R25 |
| 1 | 12K_1% | R_0402_1005Metric | R26 |
CM4 highspeed Carrier design files
The KiCad project lives in the JulioxTito/CM4_highspeed_Carrier_PCB repository on GitHub; these links point at the commit this page was built from.
- Layouthardware/CM4_Mini_PC.kicad_pcb
- Schematichardware/CM4_Mini_PC.kicad_sch
CM4 highspeed Carrier: common questions
What microcontroller does the CM4 highspeed Carrier use?
The CM4 highspeed Carrier is built around the ComputeModule4, from the Raspberry Pi family.
How big is the CM4 highspeed Carrier PCB?
The CM4 highspeed Carrier measures 90 × 60 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the CM4 highspeed Carrier?
35 components, from 29 distinct parts. The full bill of materials is listed on this page.
Where can I download the CM4 highspeed Carrier design files?
From the JulioxTito/CM4_highspeed_Carrier_PCB repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the CM4 highspeed Carrier design in my own project?
The repository has no license, so all rights stay with JulioxTito. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the CM4 highspeed Carrier without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Raspberry Pi firmware against it before you order a PCB.
Similar boards
Raspberry Pi
Open source rover
nasa-jpl
220 × 178 mm144 parts2LApache-2.09.7kRaspberry Pi
Iot
dotnet
56 × 65 mm24 parts2LMIT2.4kRaspberry Pi
SPIRIT
SPIRIT-org
82 × 155 mm130 parts6LCERN-OHL-S-2.01.3kRaspberry Pi
CM5RevEng
schlae
55 × 40 mm417 parts10LNo license1.0kRaspberry Pi
Haxo hw
cardonabits
102.4 × 211.3 mm38 parts2LCustom license673Raspberry Pi
Phased
Neumi
75 × 100 mm71 parts2LNo license507