Half life starbie
justtjasonn·half-life_starbie·PCB/starbie_pcb.kicad_pcb
About the Half life starbie PCB
Half life starbie is an open source ESP32 PCB design by justtjasonn, published on GitHub. It is a 2-layer board measuring 84 × 87.8 mm, with 7 components from 6 distinct parts.
Its main chip is the XIAO-ESP32-C3-SMD, from the ESP32 family. Other key parts include the DHT11. By type, the board carries 2 ICs, 2 connectors, 2 switches and 1 resistor.
It belongs with the sensors, keyboards and displays & leds designs in this gallery.
From the project
A custom banyan tree shaped and themed tamagotchi based off of starbie in half-life. It's inspired by my friend group at school called the banyan. It is powered by a Seeed XIAO ESP32 c3, with motion and humidity sensors, an monochrome OLED display and MX switches and keycaps.
A custom banyan tree shaped and themed tamagotchi based off of starbie in half-life. It's inspired by my friend group at school called the banyan. It is powered by a Seeed XIAO ESP32 c3, with motion and humidity sensors, an monochrome OLED display and MX switches and keycaps.
Click to view my journalling Click to view my timelapses
Click to view timelapse 1 (starting PCB) Click to view timelapse 2 (adding silkscreen to PCB) Click to view timelapse 3 (Finishing PCB) Click to view timelapse 4 (Made firmware and BOM)
Main components on the Half life starbie
Half life starbie bill of materials (BOM)
7 components, 6 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | XIAO-ESP32-C3-SMD | XIAO-ESP32-C6-DIP | U1 |
| 1 | DHT11 | Aosong_DHT11_5.5x12.0_P2.54mm | U2 |
| 1 | Conn_01x04_Pin | Display_128x64_096_I2C | J1 |
| 1 | Conn_01x08_Pin | PinHeader_1x08_P2.54mm_Vertical | J2 |
| 2 | SW_Push | SW_Cherry_MX_1.00u_PCB | SW1, SW2 |
| 1 | 10k | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R1 |
Half life starbie design files
The KiCad project lives in the justtjasonn/half-life_starbie repository on GitHub; these links point at the commit this page was built from.
- LayoutPCB/starbie_pcb.kicad_pcb
- SchematicPCB/starbie_pcb.kicad_sch
Half life starbie: common questions
What microcontroller does the Half life starbie use?
The Half life starbie is built around the XIAO-ESP32-C3-SMD, from the ESP32 family.
How big is the Half life starbie PCB?
The Half life starbie measures 84 × 87.8 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Half life starbie?
7 components, from 6 distinct parts. The full bill of materials is listed on this page.
Where can I download the Half life starbie design files?
From the justtjasonn/half-life_starbie repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Half life starbie design in my own project?
The repository has no license, so all rights stay with justtjasonn. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Half life starbie without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k