EX ONE minisumo
KamilWuu·EX_ONE_minisumo·electronics/main_board/main_board.kicad_pcb
About the EX ONE minisumo PCB
EX ONE minisumo is an open source PCB design by KamilWuu, published on GitHub. It is a 2-layer board measuring 98.2 × 82.5 mm, with 57 components from 30 distinct parts.
Other key parts include the TPS563201DDCR, SC0915, TB6612FNG, ITR8307-S17-TR8 and DM-OLED096-636. By type, the board carries 15 capacitors, 15 resistors, 13 ICs, 8 connectors, 3 LEDs and 1 transistor.
It belongs with the robotics & motion designs in this gallery.
From the project
New dimension of minisumo robots.
Main components on the EX ONE minisumo
EX ONE minisumo bill of materials (BOM)
57 components, 30 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TPS563201DDCR | SOT-23-6 | IC1 |
| 1 | SC0915 | MODULE_SC0918 | U1 |
| 2 | TB6612FNG | SSOP-24_5.3x8.2mm_P0.65mm | U2, U3 |
| 1 | ITR8307-S17-TR8 | Everlight_ITR1201SR10AR | U4 |
| 1 | DM-OLED096-636 | MODULE_DM-OLED096-636 | U5 |
| 6 | TOFVL53L0X | TOFVL53L0X | U6, U7, U9, U10, U11, U12 |
| 1 | TSOP323xx | Vishay_MOLD-3Pin | U8 |
| 1 | Q_PMOS_GDS | DFN-8-1EP_6x5mm_P1.27mm_EP4x4mm | Q1 |
| 2 | Conn_01x02_Pin | JST_XA_B02B-XASK-1_1x02_P2.50mm_Vertical | J1, J2 |
| 2 | Conn_01x02_Socket | PinHeader_1x02_P2.54mm_Vertical | J3, J8 |
| 3 | Conn_01x03_Pin | PinSocket_1x03_P2.54mm_Vertical | J4, J5, J6 |
| 1 | Conn_01x04_Female | PinSocket_1x04_P2.54mm_Vertical | J7 |
| 1 | SW_DIP_x03 | SW_DIP_SPSTx03_Slide_6.7x9.18mm_W8.61mm_P2.54mm_LowProfile | SW1 |
| 3 | LED | LED_0603_1608Metric | 3.3V, LED_1, LED_2 |
| 1 | 2.2uH | L_Bourns_SRP7028A_7.3x6.6mm | L1 |
| 6 | 0.1uF | C_0603_1608Metric | C1, C2, C5, C6, C13, C14 |
| 2 | >10uF/3.3V | CP_EIA-3528-21_Kemet-B | C3, C4 |
| 2 | >10uF/8.4V | CP_EIA-3528-21_Kemet-B | C7, C8 |
| 2 | 22uF | C_0805_2012Metric | C9, C10 |
| 2 | 10uF | C_0805_2012Metric | C11, C12 |
Show 10 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 47uF | CP_EIA-3528-21_Kemet-B_Pad1.50x2.35mm_HandSolder | C15 |
| 1 | 110R | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R1 |
| 3 | 220 | R_0603_1608Metric | R2, R14, R15 |
| 1 | 2K | R_0603_1608Metric | R3 |
| 1 | 22kR | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R4 |
| 3 | 10K | R_0603_1608Metric | R5, R9, R10 |
| 2 | ? | R_0603_1608Metric | R6, R8 |
| 1 | 1K | R_0603_1608Metric | R7 |
| 2 | 10kR | R_0603_1608Metric | R11, R12 |
| 1 | 33.2kR | R_0603_1608Metric | R13 |
EX ONE minisumo design files
The KiCad project lives in the KamilWuu/EX_ONE_minisumo repository on GitHub; these links point at the commit this page was built from.
EX ONE minisumo: common questions
How big is the EX ONE minisumo PCB?
The EX ONE minisumo measures 98.2 × 82.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the EX ONE minisumo?
57 components, from 30 distinct parts. The full bill of materials is listed on this page.
Where can I download the EX ONE minisumo design files?
From the KamilWuu/EX_ONE_minisumo repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the EX ONE minisumo design in my own project?
The repository has no license, so all rights stay with KamilWuu. Use it as a reference, and ask the author before reusing the design.
Similar boards
Stack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kCube batteryboard
willem-pennings
95 × 95 mm4 parts2LGPL-3.01.1kTrollerv2
rene-dev
100 × 75 mm33 parts4LGPL-3.0979Powerstep
rene-dev
95.2 × 71.5 mm28 parts4LGPL-3.097911ua
rene-dev
57.3 × 19 mm26 parts2LGPL-3.0979Diff driver
rene-dev
32 × 22 mm14 parts2LGPL-3.0979