7 open source boards using the ITR8307-S17-TR8

Real designs built with the ITR8307-S17-TR8, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

7 boardsClear filters|Most starred

How designs wire the ITR8307-S17-TR8

Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the ITR8307-S17-TR8 connects to, and the resistors, capacitors and other passives placed on it.

Kpin 1Connected to: GND 50% · a signal 50%
  • Resistor to GND on 33% · 110 Ω (2)
Apin 2Connected to: Signal 83% · 3.3V 17%
  • Pull-up to 5V on 33% · 220 Ω (1), 27 Ω (1)
Pin 3Connected to: A connector 33% · 3.3V 33%
  • Pull-up to 3.3V on 33% · 10 kΩ (1), 1.5 kΩ (1)
Pin 4Connected to: GND 50% · a signal 50%
  • Resistor to GND on 33% · 22 kΩ (2)

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include PCB-reflow solder table by DerSpatz, EX ONE minisumo by KamilWuu, Mass Spring Damper SysID Lab by Scalable-Open-Source-Labs and Płytka z czujnikami by KamilWuu.

The ITR8307-S17-TR8 in open source designs

The gallery holds 7 open source boards using the ITR8307-S17-TR8 from 6 GitHub repositories; a typical one measures about 106 × 82.7 mm and carries around 77 components.

100% are two-layer designs, the rest use four layers or more, and 43% carry an open source license.

The most starred is PCB-reflow solder table by DerSpatz.

Parts used alongside the ITR8307-S17-TR8

Microcontrollers on boards using the ITR8307-S17-TR8

What boards using the ITR8307-S17-TR8 are built for

ITR8307-S17-TR8: common questions

Where can I find a ITR8307-S17-TR8 reference design?

Each of the 7 boards on this page is a real design using the ITR8307-S17-TR8. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the ITR8307-S17-TR8 use?

Most are built on ESP32 (2), RP2040/RP2350 (1) and STM32 (1).

How big is a typical board using the ITR8307-S17-TR8?

The median is 106 × 82.7 mm, and 100% are two-layer designs.

What is the most popular open source board using the ITR8307-S17-TR8?

By GitHub stars, PCB-reflow solder table by DerSpatz, with 14 stars.

Can I simulate one of these boards using the ITR8307-S17-TR8 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part