Płytka z czujnikami
KamilWuu·Line_Follower_ZACZ·electronics/Płytka z czujnikami/Płytka z czujnikami.kicad_pcb
About the Płytka z czujnikami PCB
Płytka z czujnikami is an open source PCB design by KamilWuu, published on GitHub. It is a 2-layer board measuring 126.9 × 56 mm, with 89 components from 8 distinct parts.
Other key parts include the ITR8307-S17-TR8 and LM2901. By type, the board carries 62 resistors, 25 ICs and 1 connector.
It belongs with the robotics & motion designs in this gallery.
From the project
line follower robot
Main components on the Płytka z czujnikami
Płytka z czujnikami bill of materials (BOM)
89 components, 8 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 20 | ITR8307-S17-TR8 | Everlight_ITR1201SR10AR | U1, U2, U3, U4, U5, U6, U7, U8 +12 |
| 5 | LM2901 | SO-14_5.3x10.2mm_P1.27mm | U21, U22, U23, U24, U25 |
| 1 | Conn_01x26_Socket | Molex_200528-0260_1x26-1MP_P1.00mm_Horizontal | J1 |
| 1 | R_Potentiometer | Potentiometer_Vishay_TS53YJ_Vertical | RV1 |
| 20 | 22kR | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R1, R2, R4, R6, R8, R10, R13, R14 +12 |
| 20 | 110R | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R3, R5, R7, R9, R11, R12, R19, R20 +12 |
| 20 | 15kR | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R41, R42, R43, R44, R45, R46, R47, R48 +12 |
| 2 | R | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R61, R62 |
Płytka z czujnikami design files
The KiCad project lives in the KamilWuu/Line_Follower_ZACZ repository on GitHub; these links point at the commit this page was built from.
Płytka z czujnikami: common questions
How big is the Płytka z czujnikami PCB?
The Płytka z czujnikami measures 126.9 × 56 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Płytka z czujnikami?
89 components, from 8 distinct parts. The full bill of materials is listed on this page.
Where can I download the Płytka z czujnikami design files?
From the KamilWuu/Line_Follower_ZACZ repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Płytka z czujnikami design in my own project?
The repository has no license, so all rights stay with KamilWuu. Use it as a reference, and ask the author before reusing the design.
More boards in Line_Follower_ZACZ
Similar boards
Stack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kCube batteryboard
willem-pennings
95 × 95 mm4 parts2LGPL-3.01.1kTrollerv2
rene-dev
100 × 75 mm33 parts4LGPL-3.0979Powerstep
rene-dev
95.2 × 71.5 mm28 parts4LGPL-3.097911ua
rene-dev
57.3 × 19 mm26 parts2LGPL-3.0979Diff driver
rene-dev
32 × 22 mm14 parts2LGPL-3.0979